I feed the plant during the weedend with fox farm trip but no grow big and the leaves started to show nitrogen toxicity and today I’m seeing before watering this morning it’s had light burn. I’m not sure how much more I can raise my light which is a Viziosun 600w light it’s a cluck and idk where to get attachment to let it get high.
1 Like
You’re not going to light burn a plant with a 600w Vivosun. The plant is a little heavy on nitrogen, but I wouldn’t consider it to be N toxicity.
The best thing that you can do to improve things is to provide better lighting.
Do you know your runoff pH and PPM? I expect the pH is too low and PPM is too high.
2 Likes
Do ya know what the ppm of your runoff is after the last feeding or watering?
And what was the ppm of the fox farm feeding you gave her over the weekend?
Th run off was a bit high and the go farm was at about 6
5.8 the temperature over here has been hot deen a mug as well idk if that has anything to do with that
Not sure on the ppms
How can I provide better light by raising the light?
Your pH should be between 6.3 and 6.8 if in soil. An improper pH will compromise the plant’s ability to absorb nutrients.
You’ll need a better light. Suggest a light built with Samsung LM301 diodes. The actual wattage of your light is most likely around 100 watts. It takes ~200 watts (from LM301 diodes to effectively flower a plant.
1 Like
For runoff?
Correct
Also how does the wattage westh increased from 200w or decreased. How does that effect the yield and overall grow?
1 Like
Ahh imma gonna recheck when in a day or too depending on how long the plant takes to intake the most recent water.
My water usually is around 6.5ph