Excessive flowering stretch?

I have 2 plants growing which i topped at 10" high and switched to flowering (12/12) when they were 12" high.
Im now 3 weeks into flowering and they are about 4ft high…they have stretched about 4 times their height from when i switched to 12/12.
I grow in a 4ftx8ftx7ft tent and they are vertically outgrowing the tent.
This is my 2nd time growing this same strain and the last ones i had to cut early because they just got too tall.
My only guess is maybe my light doesn’t have enough ppfd?
I have a 300w led light that has ppf of 780umol/s and a ppfd @30cms of 1060umol/m2/s.
Is this amount of stretch normal or a sign that something isn’t right with my setup?

You really need about 200 watts of quality LED’s per plant.

How about a picture?

Which light (brand and model)? Many lights overstate their wattage by a significant margin. If you have a “burple” light you can expect that the light is only ~100 actual watts, which is insufficient to flower a plant. You really need ~200 watts minimum per plant.

Stretching is normal, but 4x is excessive, indicating inadequate lighting. It would be normal to expect a plant to double in size during the first few weeks of flower.

I wouldn’t trust manufacturer cited PPFD, particularly with burple lights.

Even if your light is truly 300 watts input. You are still very short on light. This is not the best way to size a modern LED. But the old rule of thumb was 20 to 50 watts per square foot, and preferably 40 - 50. You are just a tick over 10 watt per square foot.
Maybe time to learn about super cropping or other trimming techniques.

A 300 watt light and growing two plants. It maybe best to use a smaller tent.

My Vipar Spectra’s (V1200, R900, V600) are 535, 400 and 300 watts respectively.
Good tent warmers, unlike the HLG’s

Everyone has you covered, big tent, little watts. I did my shopping at Amazon, I went with Vivosun. They are having a pretty decent sale righ now. They are basically giving away their new hub controllers. The controllers will work wit any brand btw. The reason I say they are giving them away is alone they cost $145. With Black Friday and cyber Monday you can get the controllers for $80. The next deal was an inline duct fan and controller combo fo $90. Next I got the new 200w light with the built-in fan and the hub


controller for $229 light is normally $299. See where I’m going with this! I didn’t need any of it. But since I set up both tents and it’s been keeping everything in line, I have no regrets. Just a few extra lights, duct fans and circulation fans. In other words I have backup if something goes wrong! But seriously the hub is worth it

Its a “Greenfingers” full spectrum though it is only 700mmx200mm so not very big. I bought it when i started not knowing anything. The plants only take up half the tent as i have a portable air con etc. Here is a pic of the specs for my light…mine is the 3500w (actual power 300w) and also a close up and far shot of the plants…they are in individual flood and drain setups so plants are 60cms off the ground and things are out of control already as u can see.
Im already looking to get a larger light with more power as 2 plants is my goal. Vectra sounds like a quality brand…will check them out…what sort of wattage and ppf/ppfd etc would be best?



I should also add i tried to screen them with plastic lattice though not very well but they have well outgrown that and ive heavily trimmed shade leaves off it a few times to reduce the size and increase light penetration but none of that seemed to do any good…the heavy trimming barely slowed it down lol

Oh and they were switched to 12/12 when they were just above the plastic mesh way down at the bottom so u can see how much they have stretched…

@AnotherNewbie80 G’day welcome to the forum i think ya just ansered ya own question mate,not enough light,that’s why they streched up usually will only double the height if that depending on the light an strain good you reconising an watching ya plants mate,good work rock on :slight_smile:

If your goal is doing two plants. You may consider getting some tent material, and putting a wall up in your present tent. I would shrink growing size to a 3x4 or a 2x4. It maybe hard to believe but a 2x4 is a great size for two plants, and would be a much better match for you present light. You definitely have an opportunity to do some experimenting before deciding on what you want in a permanent grow room.

Yeah once the buds start on that it will definitely fall over. So get your stake and ties ready.

Definitely need more light!
Are you running out of head space up top? If so tie them down or they will run into your lights unless they are done stretching.
By adding another quality light now you can then tie those mothers down spreading them out horizontally but will need more light coverage for that.
Also I would recommend removing all the lower foliage bud sites that won’t get enough light and will result in many small popcorn buds rather than having bigger buds up top. This will help the plant redirect energy/resources to top buds.

They kept stretching til they hit the lights and started burning leaves and the crowns were inches from the roof and growing above the light so i cut them down as i have 2 cuttings off them established and vegging in another small growroom so in a month or so they will be in flower. Ive decided ill just stick to 1 plant at a time and do it properly until i can buy a larger light with more power. Im looking at getting a 640w bar style light that is about 3.5ftx3.5ft.
640w may be too much for what i want but i can use the dimmer to reduce it if needed. Im assuming that will sort that problem out and i can grow 2 properly.

Not sure if you posted this part…but what was canopy ppfd? 300watt of true input power should cover a 2x4. Tie your plants down but stay within a 2x4 dimension within your tent. Wattage you need is based on the size footprint your flowering at 35 to 40 watt per sq ft.

Great routine, for cloning.
Good growing to you.
HLG and AC-Infinity products in my grow and I am happy, with them.
Still using the Ladybugs for hunting the enemy aphid invaders in my tent.

One should consider the shape of your tent or area when choosing a light. For example a square 200-300 watt light would not give an even coverage in a 2x4. But the rectangular shape of a HLG 350R would give it a great and even coverage wall to wall. When I moved to a 5x5 recently, I quickly leaned that it would require three 350Rs to give a good and even light spread. If you cover most of the ceiling area with light it will pay off. You will end up with a canopy of dense buds wall to wall.

I wish. the 4x4 could hold more, but the 350&260 fill it nicely.
The UVA30 rides underneath, perpendicular to both, just nicely.

@DEEPDIVERDAVE, I said three 350s in the previous post to simplify it. The 260s and the 350s are the same dimensions. I actually use one 350R, and two 260FRs. When hanging all three in the ceiling there is about a 12 inch perimeter around the ceiling left open. If I did it again would use two 350s and one 260 though.