I do 180 for an hour
I don’t have a video but with the source you want to take it down to a syrup like consistency.
I use larger system but do the same. I then let it sit out with a fan blowing on it for a couple of days. I dry it in a small mason jar instead of spreading it out on a mat. It takes longer but I don’t have time to be scrapping up oil.
The partial decarb will thin it out, it changes the viscosity
@AfgVet Thank you so much!
I had been decarbing presoak… I’ll try decarbing oil next batch.
I hope you have a wonderful day!
Let us know how it goes!
Im very interested in this, just need a parts list and directions… i gave up on trying to make carts because in some way or fashion, i was never satisfied with the final product in the end. Now i have plenty of product to play with but i need to source out the right stuff to do it with the first time.
I finally ordered some of the o2 vape the wickless. Aside frome the first hit that tasted like ceramic it been able to handle the much thicker oil. I didn’t thin it out with anything and was able to use wax just heated. I also noticed I don’t need the higher temp with it. So I guess thumbs up!
Fantastic @Dirtydabber i have yet to purchase these, but I’m going to immediately from your review. I really appreciate you for letting us know!
Now where’s that dry ice when you need it…. 
Nice! Youre gonna have to do a tutorial on how to fill those things…
I second @ChittyChittyBangin @Dirtydabber
I had to get creative. But I’ll list my tools tomorrow!
First off I used this old lowtemp video as a guide and worked my way around.
I ordered
-Hot Plate Amazon
-9 ml concentrate jar Amazon
-ML fill syringe Amazon
-Hair dryer compliments of my wife
-Surface thermometer Amazon
-Old Bubble hash material
I measured out 1 gr of Bubble, placed in the clear 9ml jar and topped… I set my hot plater to 180 degrees. I used the surface thermometer to measure out the temp. You can go hotter, I wouldn’t go over 220. Maybe if I extracted directly from buds I would do the higher temp. But since I was working with Bubble, I figured if I pressed it at 180. I didn’t want to go any higher, and the purpose was to decarb, so once the bubbles stop I was good to go.
Getting it into the tip was challenging at first. I tried to suck it in and then squirt it into the tip but that didn’t work. I revisted the video and saw he poured it into the syringe then filled. So I did this instead, I did lower the temp on the hot plate, poured the contents of the glass container into the plastic syringe bottle, let that sit on the 100 degress hot plate, 100 degrees didn’t melt the fill jar, but kept the liquid warm. Once I started to fill the tip it cooled rapidly.
That’s where the hair dryer came in. I used the heat to thin thi oil in the tip until it settled to the bottom and topped it off. After this I used the vape pen to geat it a little to make sure it all settled. Then I let it sit for to hours, this was out of habit when I used the wick tips, not necessary for the wickless tips. First puff did taste the ceramic, but after it sat dor an hour, it was good to go.
Next I will try this same process with oil made from cured flower.
I do note that this was old material! When I first pressed this months ago it was a pretty gold. 
Didn’t want to waste fresh products!
Super awesome info!!! Thanks @Dirtydabber this rocks!!!
Nice!! Where did you get it? Does it heat the cartridge? I have a heat gun, but that puts out too much.
It’s a Herb Iron, lighter. I’ve had it for several years. I use it to butter my papers and make melt bowls. Extremely handy lil tool. It’s basically a ceramic tip soldering iron.
I ran into the same issue as you, but I had this to pull out to make chit easy. Keep that cart glass warm in a spot going up/down on glass. Inject. Rub glass while spinning to disperse.
I have one of these, but no injection needed. I roll out some shatter with my fingers and melt down glass with tool.
After the oil cools down, does it not solidify again?
Yes, without a liquidizer added, but that doesn’t matter with the ceramic carts
Yep, as you use it it heats up. The only recommendation I have is once you are done with it try to have it tip up. So the warm oil sinks to the bottom and you don’t get the bubble at the bottom. If for some reason that happens I warm it by hitting the button for 3 sec intervals to get it to flow down.
