Next Up!
Okay, so my first attempt at Magical Gummies using the concentrate QWET wax (if that’s the term lol):
1/4 cup corn syrup
1/3 cup of water
1/4 teaspoon citric acid
6 ounce package of Jello
2.5 packets of unflavored gelatin (Knox)
1/8 teaspoon KoolAid mix (same flavor or not as the Jello and this is optional)
Gummy bear molds (I used the 1 inch / 3.5 ml molds)
Syringe (I buy mine at the local hardware store for less than $3
First - lightly oil the gummy bear molds but VERY lightly - you shouldn’t see any excess oil in any of the bear.
Next - Sprinkle corn powder on some parchment paper to put the bears on:
Mix all dry ingredients into a heavy pan, then stir in corn syrup and water - then let this sit for about 10 minutes to let the gelatin bloom:
Weighed out my concentrate. This recipe makes 95-100 Gummies so I was aiming for 25mg each. 100 X 25 = 2500mg thc
2500 / 750 (how much thc is in one gram) = 3.33 grams (of concentrate)
Turn the stove to a medium/low heat and heat the Jello until it’s fairly clear but don’t stir too much or too hard so you don’t get bubbles:
Stir in the concentrate until it’s melted completely (I had a hard time getting the wax to melt evenly so I found I had to turn up the heat just a little bit and keep stirring gently (I think this made the mixture a little too thick but not sure what to do about that…
Using the paint syringe, fill the gummy bear molds.
Let the gummies sit on the counter for about 15 minutes, then into the fridge for 4 hours.
Pop them out on the the parchment paper, cover and let sit for a day or two until the gummies get to the consistency you like.
This recipe made 98 gummies with approx 25+mg THC each. It was difficult to get the wax to melt into the jello so I think next time I will try using a concentrate that hasn’t been evaporated all the way down to a solid… just a little fluidity to have to measure it by ml instead… I’ll post that one later when I need more gummies LOL