Did the Giraffe smokin a bong in my avatar give it away? 
I should probably put the Dutch down because all this time I had no clue that was your avatar 
Should I go ahead and open up the center of her a little bit or we thinking we can just let her go and do her thang for a little while longer ? And I have my rh around 55-60% should I aim to lower it a little bit more or we safe for now ?
edit
I think this thing is gonna break the record of my last grow that was 418 grams dry 
I wouldn’t take anything unless you see moisture in between the leaves. And if you have good airflow 60% is doable. Hopefully it isn’t staying at 60% tho. 
I have a dehumidifier running so it stays pretty balanced in there with the rh wise. Leaves touching I do get some wet spots. Fans blowing above and trying to get some through the canopy but I’m still working on the comfortability with these leaves. Incline fan is on 10 so it’s able to pull anything out of the tent.
I’ve dealt with mold my entire life pretty much with what my dad did for a living and then worked beside him. So I absolutely hate even the thought of mold
If your seeing moisture take a few leaves but remember the plant has to replace a lot of what you take off.
So pretty much just take off any leaf that’s really overlapping each other in a sense ??
@Dman1969 something was telling me to check the auto tray pot…. I’m glad I did… IT WAS GUNKY IN THERE. Full system swap about to happen now. And about to make new feed beings it gunked up…
Make the feed same as last time ? Or should I lighten up on something 
I used to have problems with my tank sludging up. The Rizotonic is probably the problem. Stop using it for now. Lighten up on the silica. 10ml a gallon. what other nutrients and additives do you use?
Are you still getting clouds when you mix your nutrients?
At first when I get up to adding part B once I ph it it goes back to normal. But I will admit I got sloppy the last couple adds and did not purge the lines clean so it’s very much a possibility that was the problem ??
This is what I have been using and how much been added
Silica 15ml per gallon ( triple up )
Calmag 10ml per gallon
Part A 56
Part B 56ml
Rhiz 30ml
Cannazyme 38ml
Canna boost 40ml
The Rizo is probably the culprit if it’s kinda sludgy like clay in a way. When you mix your nutes next time do silica let it sit the use half of what you would normally use of ph down. Then do your A the the B so forth and calmag at the end then final half of the PH down. You won’t see the clouds no more. The triple up on the silica puts the ph at 9 or better. Using half the ph down you normally use will level the ph so it doesn’t cloud at all. It will stay crystal clear the whole time. And you still can dial your ph in at the end
You can top feed the rizo. I’m top feeding Rizotonic Boost and Cannazym. Because my lines get stopped up super easy. Only yucca,silica calmag and A and B go in the Rez now.
This is the very first time this had happen to me, I have a strong feeling my submersible wasn’t running or took a 
on me. I have a new one on the way and will be here tomorrow.
Should I still skip the rhizo this go around ? And lower the silica down to 10ml a gallon again ? I’ve been extremely busy setting up my business and trying to open my doors so I’m not sure I’ll have the time for the top feeding this go around as I’m hardly home and really leaning on the auto pots this go around.
You can keep on doin what your doin. I was trin to figure out what was causing your problems but looks like you got it figured out. If your cool with what’s in the Rez keep on keepin on. Don’t change a thing if the girl is happy that’s all that matters
I posted what the pots looked like if you wanna take a gander at them 
( these are tears this time ). So it’s most likely the submersible may have been the culprit 
She’s definitely happy !
The reason I got away from autopots is because the lines always stopped up on me. Come to find out the Rizo the boost and even the Cannazym can clog lines. So I’m just top feeding the possible causes. My watering halos have a 3 mm supply line coming off a 8mm line. That little tiny connection gets stopped up pretty easily. You got 1/4" lines so you probably ain’t havin my problems. If you do now you know what could be causing it.
I’m gonna give it a go again and if I need to switch anything around I’ll be left no choice. I feel like it was the submersible so I have a bigger one coming to hopefully handle that problem.
Should I go ahead and give the same amount should I change anything add more of something or less of something ? Tomorrow will be 28 days from the flip, 2 weeks into true flower ?
If they look good and no tip burn you could up the A and B and you can up the boost once you see pistils. Take small steps on upping.(3 to 5 ml max at a feeding) You can always add more. It’s not that easy to take it away