Grow mates. Just completed my first harvest of RQS Solomatic CBD. I have a dedicated 2’x4’x6’ tent set up for drying. My lung room is set to 67F. My dry tent has an AC Infinity 4” exhaust fan with Pro 69 controller. I have a 12” fan pointed towards the corner circulating the air within the tent. A manual humidifier controlled to set point of 57%RH and the exhaust fan speed is set to 1 (constant) with a high temp set point of 70F.and a high RH set to 60%
I cut and hung the entire plant. I wet trimmed 98% of all leaves with the exception of the small sugar leaves
My tent maintains temps between 67.9F and 70.8F.
RH is steady at 57%
VPD steady at 1.09%
Since this is my first grow and harvest I’d like some feedback on what Temp, RH and VPD I should target?
I included some photos of the controller data log and plant pre and post harvest.
I usually try to aim around 60-70°f and humidity 50-60, but that rarely happens lol, summer hot and humid and winters cold and dry, havent had an issue yet. Congrats on your first harvest
If you could maintain the lung room temperature of 67 would be great Humidity 40 to 50 also works well. Run your exhaust fan on low speed pull the long room temperature through the tent. A slow drying period is always the best.
Good luck
The 120 total protocol sounds interesting. The lowest temps I can achieve are 67.9F at night and about 70F during the day. I’m shooting for a slow dry. But reluctant to drop RH into the low 50’s as I’m concerned about accelerating the drying process. I’ll experiment.
