I used loc-tite and it lasted about 250 miles maybe…I didn’t get it in there right…I’ll get it…I figured out the Future1 is the wide-eyed sleepless weed…thats for early morning…lol…
If you’re talking about the spark plug hole you can install a helicoil they sell kits to tap out the spark plug hole and install the insert to bring back good threads without removing anything but the old spark plug
Correct. Is there any way to ensure no debris gets into the cylinder??? Thats my main worry 
about cutting new threads. AAARRRGGGHHHhhh , going back to my sailboat !!!
Use axle grease on the tap it will hold the debris preventing them from dropping into the cylinder
Make sure to go back and forth while tapping
Turn half turn in back off 1/4 turn repeat until bottomed out
This prevents the chips from building up especially if your head is aluminum
If you have problems send me a message on IG I can answer your questions if you want
Same name
I appreciate ya getting involved i was thinking the aluminum if any shavings are as critical. I knew we had issues with ours at work till 04 then they put more threads in there.
Yes any metal can scratch the walls or get stuck in a ring
I also crank the engine over a couple revs after the repair and before installing the plug to blow anything out of the cylinder it will go out either through the exhaust or out of the plug hole
Anytime brother always willing to assist where I can 
Holy St_t BrotherBeav love that wow.
Good Afternoon Growmies slow day nice quiet Sunday built a cooling box trying to adjust my lung room with out more electricity. I have a stand up ac unit plugged in its using almost 700 watts with the compressor running. Might check my small wall unit to see. Alway looking for the next step.
Moved my girls from the blue closet into the tent. Cleaned the closet and rebuilt. Drawn to the gold. Nicely reflective. My garden is doing great. I weed with my line trimmer less dirt tracking. More clones clipped for the cloners.
Caterpillar is getting bigger starting to grow out. @Retiredoldguy grain bags should be growing Rog
HEY NOW @Jaysittinback brother
Good afternoon captian B I hope yiure having a swell day. Everybody a swell day.
Yes Northern Brother how ya been i did see your email havent made it back but burning that top of your head isnt good. Your outside gardens should be kicking it.
Could you get by with less ppfd. Or slight reduction day length
Working from home today, can’t get better, 800 ft of trim to run through the shaper for some remod work ,500 ft done rest will do tomorrow 
Yiur own stuff or for somebody. So ya got a planer and edger n that stuff I guess?
I have the lights turned down some, part is the attic has some insulation but its not as air tight so it gets a little steamy. Tent cycle is at night. I had them on during the day previously but i went to night time for the electric use. You know its a balancing act.
I tgink yiu once said you got 12" vent fans. Cantdo much better there 
watch yiur fingers
Yes the 2 fans but i think what i might do is seperat the one and let it regulate the lung room. Small modifications