Have 10 kg of coconut coir coming package states EC 0.5
I’ve grown hydroponicaly and in soil but never in coconut coir.
Other than hydrating do I need to to buffer with cal/mag for my seedling starts. I will be adding perlite of course. And plan to grow the girls all the way in coconut coir
Yes, I would buffer with Cal-mag to 5.8- some double buffer , you want coir to be soaking in bucket for about 8hrs then rinse with clean water to under 400 EC for seedlings.
Cal=mag in bucket should be over 1300 EC
That is what I have done in past.
Do you have EC pen?
If so, put your coir in bucket or tub add water then slowly add Cal-mag until EC is over 1300.
Then adjust your Ph to 5.8
You want coir to be fully submerged under water.
Leave for 8 hrs then rinse to EC 400
I just rehydrate with heavy cal mag dose and jacks 321. Regular jacks 321 recipe part a 18 grams, part b 12 grams, epsom salt 6 grams, 6 ml silica, and 30 ml cal mag ph’d to 5.6-5.8 (5 gal batch). After rehydrated i transplant and use great white mycorrhizae on the roots and top with some after done then water till runoff. If there is leftover water from rehydrating and watering to runoff ill continue to use it till gone then return to regular feeding
What brand of coco coir? I’ve purchased some off brand coco that stated it had been tripled rinsed with a low ec but I found that not to be true. I rehydrate the coco with 5.8 tap water then rinse this with Jacks 321, silica and a dose of microbes at 5.8 and 500-600 PPMs for seedlings and bump that up a 100 PPMs each week after the 2 week seedling growth. I maintain 800-900 PPMs and 5.8 PH through veg then 900-1000 PPMS and 6.0 PH in flower
Not a lot to add other than Coco for Cannabis is a good reference. I use Canna Coco bricks. Many who use this coco say they hydrate it and use it. I still buffer with CalMag.
The last time I prepared two bricks I hydrated them with 2 gallons of water containing 15ml of calmag. Ph the solution to 5.8 - 5.9. It soaked for 24 hrs. I use Jacks and mixed up 2 gallons ph to 5.8 and let it soak for a day. After it soaks I put it in several 5 gallon fabric pots to drain. This is a different batch. Because I was using it right away I added perlite before putting in bags to drip dry.
@OGIncognito i use canna coco bricks but have never personally saw the need to soak them. @beardless do you see any benefits to soaking your dehydrated coco? Only issues ive ever run into is when i didnt rehydrate with cal mag. But i always just rehydrate with heavy cal mag solution and regular jacks recipe and immediately transplant then water to runoff again. Im just trying to figure out if soaking is somewhat better than my method?
My method is very similar to yours other than I use PH water to rehydrate then I pour a gallon of jacks, silica and some microbes to run off and transplant my seeding
0k dumb question on the 3 vs by 5 gal pot. Duh. So since it’s single digit temps outside it looks like my coconut coir brick and I will spend some time in the shower rinsing and hydrating. Lol.
That should reduce the mess and keep my wife off my back for the mess
The Canna coco bricks come in a very well made plastic mixing bag, and this is very handy for hydration of the coco. I just poured two gallons of nutrient solution that has cal, mag, & silicone at an EC of 2.4, in each two brick bag. Then used a tote to mix the perlite and coco together, very easy. The plants did great with this until the AutoPots were started. It appears that Canna is quality coco.
I am new to coco also. But it appears that my plants that I top water to a run off do better with a nutrient level at 2.2 EC. While the bottom watering plants in the AutoPots prefer an EC of 1.8.
Don’t know how I missed this thread. I buffer new coco twice for at least eight hours each time. Use 1.5x whatever the max dose on your calmag bottle is. So if it’s 5ml then use 7.5ml per gallon in your buffering solution. Cocoforcannabis(dot)com has tons of information about every aspect of growing in coco. Spend some time reading there and you’ll be glad you did.