Flushing will make no difference. Peroxide will kill your microbes. I know exactly zero growers who put it in their soil for any reason.
There are millions of different kinds of microbes in your grow medium (unless hydro.) Fish Shit can help, but it’s just not a good idea because the diversity of microbes will be diminished.
Okay. Well I don’t have an RO system… So I cannot do anything about the chlorine in my water… ppm off the tap is 480ppm…
i’ve heard of people on GBY podcast who add it to their water to remove the chlorine…
Growers using tap water will leave their water sit out for 24 hours to gas off the chlorine.
I’m not sure I would listen to the GBY podcast if they are advocating such a thing.
Well they advocated that a couple of drops pre gallon of water will remove the chlorine and chrolamine. it’s a small amount…
If you’re looking for a way to increase evaporation of chlorine I would just get a decent air pump and air stone.
Whelp! Definitely over feeding! Just did a flush and the PPMs were way too high. 3200… Not sure how that happened just using Promix and worm castings. Using Apera PH meter and Bluelabs PPM/EC meter. PH was fine though 6.17-6.3.
I will just feed straight water moving forward to get my ppms under control.
Problem with my tap water coming out at 430ppms though…
Was able to flush half my plants to 1400-1600ppm… My water sucks. Bought an RV filter which helped. flushed twice! PH is stable! 6.0-6.2. pretty much old thing that hasn’t gone wrong…
definitely set myself back 2 weeks with nutrient toxicity!
Once you get damage like that to leaves it doesn’t go away. Do you feel it’s getting worse or staying about the same? Taking that trip was going to take a toll on plants.
If in promix having ph range over 6 is a little high. Set it to 5.8 and when you feed do so to plenty of runoff. Other than that, what are you mixing to get to around 1400ppm?
I’m typically feeding at 900ppm, but I mixed in worm castings to my soil which must have boosted the nitrogen considerably…
I’ll try to knock down the PH next watering.
typically I just feed my nutrient plus calmag at 5/ML Per gallon…
I think it’s getting worst. They photo was 1 day post flush….
Might need to start over…
I can’t really help much with the adding of organics into synthetic grow, I’ve never done it.
Did you just top this? If so usually wait a week or two before sending to flower. If not you could flower this whenever you’re ready.
About a month ago. I just removed some of the lower vegetation below the canopy…
Okay cool.
What PPFD should I shoot for in flower?
Scorpion Diablo V2. Currently at 50% power.
I like 800ish. You could do more or less, but 800 seems to be a pretty good balance.
Awesome!
I don’t think you need to worry about that right now.
