I would be more worried about temp and humidity for them to bust ground. Once that happens, then you can focus on the dli/vodka
Chart.
Oops dli/VDP
5 Likes
@Woodrow
This is a good
Point
2 Likes
I feel I have temps under conctrol with the heater hooked up to my Inkbird controller. What do you recommend I be at for rh? Will a cool mist humidifier be sufficient?
To be honest
I have no idea what an Inkbird controller is.
Just try to maintain 75 temp with a high humidity and they pop.
1 Like
@Khaos850
Also, have you tried putting a cover over them to keep humidity in? My first three plants I stretched Saran Wrap over the tops, stapled it down and cut holes in in- seems to keep the humidity in. Now I have humidity domes you can get on Amazon
But I keep mine in between 50-70 % range
3 Likes
I planned to dome them after they popped. Did not think of it prior to. I am putting in a warm humidifier now to see where that gets me @Lorenda_x
2 Likes
Getting ready to start my next run.
I’ll tag you @Khaos850
2 Likes
I think warmth and humidity is more important then light since they haven’t popped up yet. That spacing seems ok. If they stretch after they pop out then lower the light.
Nice set up 
2 Likes
@Khaos850
Ahhhh
See I
always take my dome/cover off after they pop
And I have a cool mist humidifier for when the dome comes off
4 Likes
The Photone app works great, make sure the setting is at your lights on/off cycle when that time comes 
3 Likes
Thank you very much for the quick and informative replies everyone. My rh is up over 50 now. Should I crank it up a little more. According to the charts. 70-75% is optimum?
1 Like
@Woodrow I have started a journal. Do you mind if I tag you in it?
@Khaos850
It is a really nice set up. And this is the best place to come for info. Arguably the best forum I found in my life.
Happy growing 
2 Likes
Thank you, you as well!
1 Like
Not at all. @Khaos850 Thank you.
Im just a newbie grower trying to figure all this out myself.
This is a great forum with a ton of information.
4 Likes
i only used my light to keep it warm to sprout, kept my rh at 70 and had no issues. (knock on wood)
4 Likes
Hy welcomed to the community @Khaos850
Like @OGIncognito said for seedling just a little amount should be good for sprout
I just said low at 50% or 25% in seedling or just move you light to the top of you tent and used at 100% 
like i do
Hope this help you
Thanks for tag @Lorenda_x
Happy growing 
3 Likes
Should I turn my light on now and just keep it on 24hrs until the rest break soil then turn to 18/6?
1 Like