@Myfriendis410 do you have any suggestions as well?
I think Iād not worry about that one leaf.
@Myfriendis410
Okay I hope it doesnāt affect the rest of plant or growth !
Was this due to early nutes or high ppm ?
So I can be careful next time
One more question , I kept my tap water for 24hours for removal of chlorine but showed the same ppm , does it mean my tap water doesnāt have any chlorine ?
Chlorine is not read by your ppm meter
Probably some condensation got on the leaf.
One thing you should do is determine if your municipal water contains chloramines. If so you may need to treat for that
Im pretty sure now its chlorinated water
Because after 24 hours my ph was shooting up by 2 point and then will remain stable from next day onwards
@Covertgrower @TDubWilly @Happilyretired
I think all the above problem was also due to this only , as I changed the water 2 times ( without curing it from chlorine ) as I was worried for nut burn , may be Chlorine was harming it in first place .
Will be more patient from now on .
Thank you guys
We all have different growing circumstances ā¦I think this forum works so well because we all get together and spitball ideas from our own experiences and experiences weāve seen other people on this forum haveā¦
The old saying comes to mindā¦(it takes a village)ā¦ We donāt have a village but we do have a community And now you are part of that community and now we will also learn from you as yo u continue to learnā¦
What Iām really getting to isā¦ Youāre welcome from the communityā¦
Iām glad to be a part of such amazing community
Learning and growing with you guys 
Thanks for all the help
@Myfriendis410 @Covertgrower @Happilyretired @TDubWilly
Hey guys , hope everyone is doing fine .
Wanted to update you guys and ask if My babies are doing fine , and should I cut these condensed leaves and or hope thatās doesnāt spread to others
2nd picture one is showing real slow growth than others
Can you show a picture of the roots? How far below net pot is rez level? What is the TDS of your nutrient load now?
Are you keeping those balls wet? I canāt tell cuz they are white.
Roots are also important as mentioned by @Myfriendis410
Growth is slow for sure, I donāt see any new growth to determine plant health off of.
Have you done everything you can too make sure that ph is 5.8 and you are sitting around 200ppm and you have plenty of oxygen in your reservoir?
The only time I had zero growth in dwc I was accidentally sitting at 0ppm in the reservoir
COPY/PASTE the below list into your forum post.
Answer these simple questions the best you can.
If you do not know, or do not use something; Just say so; Or post
NA (non applicable)
What strain, Seed bank, or bag seed
Age of plant
Method: Soil w/salt, Organic soil, Hydroponics, Aquaponics, KNF
Vessels: Pots, Grow beds, Buckets, fabric pots
PH and TDSof Water, Solution, runoff (if Applicable)
PPM/TDS or EC of nutrient solution if applicable
method used to measure PH and TDS
Indoor or Outdoor if indoor, size of grow space
Light system LED, MH/HPS/CMH/Fluorescents, or other
Actual wattage draw of lights
Current Light Schedule
Temps; Day, Night
Humidity; Day, Night
Ventilation system; Yes, No, Size
AC, Humidifier, De-humidifier,
Co2; Yes, No
If growing Hydro some additional questions:
DWC? RDWC? Autopots? Ebb and Flow? Other?
Distance of liquid below net pot (DWC)
Temperature of reservoir
TDS of nutrient solution
Always try to upload a clear picture in white light of any issues you may have to allow the community to assist you.
Iāll fill out the info and post it later tonight
Ph is around 5.8 and ppm is 280
Water level is below the net pots and keeping the balls pretty wet
Even have a good air pump so plenty of oxygen
In 2nd picture you can see the roots of the slow one
Others have good root growth
You should reduce your top feed to allow the plant to hunt for a moisture source. It wonāt grow if itās exposed to too moist conditions. You also run the risk of stem rot.
Is that a top feed? Just looks like the air line
Thatās pipe for air stone
Iām just worried about those first leaves which seems to be dying ,
Should I cut them ?? Or let it be ? @Myfriendis410
@
How about filling out the Support Ticket I postedā¦
@
Strain - Amnesia haze
Method:, Hydroponics,
Vessels:Buckets
PH and TDSof Water, Solution, runoff (if Applicable)- 6.8 / 100 ( tap water)
PPM/TDS or EC of nutrient solution - 5.8 / 350ppm
method used to measure PH and TDS - ph/TDS meter
Indoor or Outdoor if indoor, size of grow space
Light system LED, MH/HPS/CMH/Fluorescents, or other
Actual wattage draw of lights - indoor , 4*2ft (5ftheight ) , LED GROW LIGHTS ( 400w actual )
Current Light Schedule - 18/6
Temps; Day, Night - 26-29 Celsius
Humidity; Day, Night - 45-50%
Ventilation system; Yes, 4 inch two exhaust system
AC, Humidifier, De-humidifier, - AC in the room
Co2; Yes, No - No
If growing Hydro some additional questions:
DWC? RDWC? Autopots? Ebb and Flow? Other? - DWC
Distance of liquid below net pot (DWC)- almost 2 inch
Temperature of reservoir. - 22-24 degree Cecilia
TDS of nutrient solution - 360
I think itās time to start bumping up your numbers and the plant will respond. Bottom leaves can remain for now: let it get a bit bigger before removing. Ultimately you will want to be at around 750 ppm.
@TDubWilly @Covertgrower @
Actually the same problem has started to show on second set of leaves too , will post picture soon .
Iām using advance nutrient ( micro , grow and bloom ) any suggestion on their schedule or should I go according to their recommended dose only and bring ppm up