Darn it. I just reinstalled it in tent lol. So I have to take the driver off the board I guess will check tomorrow thanks. What a pain in the butt
2 Likes
There she blows
Made in Taijuan
Thanks for pointing that out. I have a feeling it’s not up the whole way. If I adjust that without a volt meter or amp whatever it’s called could it start a fire if I bumped it up ???
I took off driver to get to dimmer. I was able to bump it up a hair but it is so touching to much it shuts off Just turning it mm’s it’s all over the place. And yes the board does get hotter but not near as hot as that 120h 48a driver so now what do you recommend?
It shouldn’t shut off turning it up or be extremely touchy. And the acceptable operating temp is really high, so getting warm doesn’t necessarily mean there is a problem.
If you were able to check voltage and current and current you could compare to board specs and see where you’re at. Without this I’m not really sure what to tell you.
3 Likes
Leave the driver outside the tent if the cable is long enough. It’ll help with inside tent temps 
4 Likes
Should I tell hlg how touchy it is ? Yes without meter I’m pissing in the wind. Judging everything by eye
2 Likes
Cord is too short but thanks. HLG said that less light gives better Quality weed is that true. Comparing denser buds to lighter buds
3 Likes
Less light is better than too much light but less light is not better than not enough light. There is a happy medium where you gey nice dense buds but still have healthy plants and an efficient grow.
6 Likes
Just needed some advice on my pot mix
I used cocoapeat, earthworm castings, perlite,NPK mix, and some normal gardening soil.
Will it be good enough to grow ?
3 Likes
Thanks again which lamp would you use the patriot or the 200 Rspec?
2 Likes
What size is your grow space and how many plants Growmie? This will determine how much light you’ll need
6 Likes
Was this a premix medium Growmie or something you mixed?
You can skip the castings, the N in NPK you’re using has the needed nitrogen.
Which brand? Give us a little info and pics of the soil mix and nutrients you’re planning on using
4 Likes
I had all of it seperately and mixed them myself
Most of the ingredients are from ugaoo (a brand in india, providing all things needed for gardening)
Only the normal soil is from my local nursery (I might have added 25% at max )
60% coco 15% castings 20% soil …and some npk mix
I had planted some local seeds …4 germinated …some died…most probably due to over watering
Because I used only coco and soil (50:50) and some npk
I don’t think the local Indian weed plants are used to Indoor growth …only 1 of them is doing well for now
I will get 3 more fem auto BLUE DREAM by this weekend.
Just trying to figure out the best soil composition
I’ll be adding about 60-70 coco this time…and perlite (and others above) also…to increase air circulation and try to water only when dry
This is the current local seed plant
I doubt if it would survive…
2 Likes
Seedlings require very little water but need the RH to be high in the range of 65-75%. Most of us use a clear dome like a solo cup and most the inside of the cup and place it over the plant. This will create the needed humidity for the leaves to absorb and feed the roots. Remove the dome periodically through out the day for fresh air, remist and re-dome after a short fresh air period. I water about 2 shit glasses every 3rd day around the outside of the dome
6 Likes
Thanks a lot…will surely try this in my next germination and planting for my Blue dream
3 Likes
Does your water stinks??? 
7 Likes
damn wheres spell check when ya need it!
5 Likes
my shots are pretty 
Kapt
4 Likes
4 Likes
2x2 and 3x3
3 Likes