Well guys I ordered a three pack from Wax Liquidizer. I got 15ml of Banana OG, Mango, and Pineapple Express. 2ml solution per 1g shatter of your choice.
I followed the directions, mixed it up, put it into my mod tank and once it started drawing the fluid in I am getting nice draws, good high, and the taste is good. I mixed together some Cherry Pie distillate and the Banana OG.
How do you like hitting it from an RTA, I’ve always wanted to drip on my RDA.
Are you talking mesh cotton coil vs ceramic?
It’s working good so far. I do notice some deep throat harshness when it gets a bit warmer. Will turn down the power and see if that helps.
I’m looking into the ceramic coils that will fit this tank!
The regular old C cell 3v cart or whatever it’s called works just fine as long as you turn down the voltage to match if it has that option. I’m interested in the distillate results as I always used rosin and it would gunk up the carts
Ahh, okay. Well I found a nice tank that uses ceramic coils that I’m ordering for under $30. This mix seems to be working good, just can’t hit it more than a couple times in a row before the cotton can’t keep up, might just need to run it a bit thinner. I turned it down from 40w to 30w and is hitting a lot better. I have some straight shatter to try on my next mix and the one after that will probably be an RSO/ distillate mix so I can get some CBD in there too!
So all I need is wax liquidizer and extract and it’ll work? What about the vaporizing device? All the same?
I’ve never tried it this way, so I’m still catching up.
Curious about that as well 
I would recommend 1 gram ccell cartridges with ceramic coils
I jumped on the vape train about 3-5 years ago and ventured on blowing my own wax to making my own carts.
Rda tanks will gooo up and you will need to change your coils out every few tanks
I’m running mine through a standard mesh cotton coil, but am looking at mod tanks that take ceramic coils!
I have noticed that the high doesn’t last as long as I would like, hopefully adding in the distillate next time for the CBD will help even things out.
@Sincitytoker I have looked into them and for the price I can run coils through this tank as it holds about 4 mls of fluid or enough for 5 small tanks.
One of the reasons your high isn’t lasting as long is just the dilution rate. Most of the commercial carts I’ve had are labeled as 60-90% thc. If your wax is 100% and you’re cutting 2-1 it would be 33% ish thc by volume. I think it’s reasonable to experience what you’re seeing.
@Covertgrower yes that’s pretty much it. There was youtube videos on mixing process. Everything you need can be purchased from wax liquidizer, but you may have a lot of it.
I see what you mean. It’s a nice high while it last, can probably run it a bit thinner and be able to puff all day. Lol
@Covertgrower I got the 15ml bottles and each one will make 7.5 batches and the end result of each batch is approx 3.5 ml. 2ml solution and 1g concentrate.
I’ll have to spend some time researching. I would like to at least try this method of consumption. I think that better half would probably appreciate the convenience, as she’s mentioned it before. Is the wax decarbed before combining? Or decerb happens with the coil?
If your interested in using a mod style without having to fill the tiny carts and still use a full ceramic coil the Smok Nord and Nord Pro are great options too. They are designed for salt nic, but due to the ceramic coil work great for this stuff too. I will probably end up getting one of those sense the coils are pretty cheap and my local store carries them.
No you don’t have to decarb the wax first and vaping it will get it to proper temps.
You do need to heat it with low heat to turn it to liquid so you can mix in the liquidzer. I just ran my first blast since 2011. So in a couple days I’ll be making up some carts. I bought a couple different kinds of liquidizer to see what one works best. I’ll properly document my process for you if you would like.
That would be really helpful thanks @ReelOfishalTrees
I’ll have to look these up.
I should be making it Friday night or Saturday morning. I’ll keep you posted
