pruned a few handfuls off the bottom and out of the middle. taking out only the very few I thought I needed to.
4 Likes
Ok @peachfuzz, im having a brane wave 
… I think im going to get rid of current veg system 2 the silver one… hear me out, I know it seems like I just like building things… 
and replace it with another yellow lidded tub, with six in veg in two tubs then I could just pick the lid up and walk it over. each time a tub is ready for flower, the place I get them from doesn’t notice if you get 2 lids at a tub…
and a seed tub… I have to fit that somewhere…
I could also have it drilled in such a way that you can have 8 holes and only use six when you get to flower you just cover them…
you get me?
2 Likes
that was a mission, have friends coming over, and I ‘had’ to clean the two veg tubs… man whatever I put in there before coated everything black… took longer then expected. friend started arriving
and just when I started filling the silver one the water ran out… that’s weird.
my perfect water that I brag about so often was not filling the overhead gravity tank. im not going to bore you with my frantic thinking and movements but with 8 extension chords and a sump pump I was able to get 60 liters to put the seedlings in it had ppms of 90… dirty, but that’s from the inside of the sump hose… nightmare.
I then got the pump going, have a septic pump to replace though… never ending!
ill replace the nutes tomorrow on that one… because I rushed and the Si fell out of solution.
I write it here because then I don’t get lazy and think it will be right and not do it…
hope ‘you’ all are well…
1 Like
Looks good. I just worry about humidity/mold/rot when I see that much green all packed together like that. I like a little space between nodes to help with airflow and lighting.
2 Likes
I did change the nutes over today so its 520,650,670 atm. ph going up t 6.3 lowered and lower tomorrow, a few floating roots atm, got caught in the pump probably go to lightly bigger just to avoid this perhaps some filter wool, have a tied around the main offender.
gotta go away for a few days so I will be getting some stuff to finish setting up.
the thing i Love about my pots, now that I have enough I just have to boil them and they are ready, no medium, no changing pots, ready to go, see a couple on the esky… I like them.
didn’t top today, will tomorrow. 
4 Likes
so went through and topped everything. about 50.
and did a little pruning, and I forgot im at the stage where I could be cloning if I needed… im Ok.
found the best thing ever at kmart, you can kneel on it, fits everywhere,…
got a pink hue to the bb/ww… could this be mold? or just a colour or deffecency, or just a colour… in the middle of veg…mmmmm.
this id my ventilation comes on every 15 mins to half an hour.
but it is damp in there where the leaves touch… and I raised the lights @elheffe702, my cousin was over yesterday and he was how much light is there atm and I figures out atm 500-600 watts lol.
he Is a really good outdoor grower… helped me a lot when I was a kid and just couldn’t get the topping thing and why I had 6 in there, you can do that with one though… and you can do that with lst, and im like… don’t worry bud im in very good hands…
5 Likes
I think it’s just the plant showing colors in vegg already…
I have a purple og that’s already showing colors and it’s in vegg still…
I’ll get you a pic later…
Got the table up , just need to get the floating walls hung and plant’s in and everything adjusted…
5 Likes
it is just pink colouring, weird. could be from the stress of wrestling them from the clutches of the Dr kippling clones… was a battle…
.
now, that’s using every nook and cranny, , I always learn something from your photos that I like, at least now I know what im looking at, before .
like where you have your air pump… then I think oh I can have it on top of the tent in the cool air.
so u can fit around that table? 
edit the emoji may have been not the best choice it may have been taken as a joke, have you allowed space so you can fit around the table?
3 Likes
Ya , there’s space around the table…lol
About 20 inches at its widest point and about 30 inches down lower under the main table…
Oh ya , I’m in construction brother…
Been doing it over 20 years…
The leaf coloring I wouldn’t worry to much about…
2 Likes
ph’ed everything to 5.9 and im now 400 miles away from my room for a couple of days. the ppms, are 510, 650, and 720 topped everything I could find… im going to need some special scissors.
@peachfuzz could tell u were in construction… of course you can fit around, very well thought out… ill have to adapt… , I have ideas…
now I need to get a fan while im here and some ducting, I have an old six inch. what do u think? I know u don’t grow in tents… I mean your grows are intense but … so I might post a question and see what others think, but at the hydro shop man they are expensive, I can just go to my aircon supplier and get them cheaper, I can build some boxes that lets the air out and I can duct it in from the room, so its positively charged.
…
now will I have to worry about humidity or will my split system handle it?
thanks legend,
hope your having a good one…
2 Likes
I use an 8 inch extraction fan for my flower room…
It does 2 things , it cools my lights and it moves air through my room when I’m not using co2…
I will draw you a pic of my setup…
But ya , it’s a 850 cfm 8 inch inline fan I believe…
Will double check for you…
Got my walls up and plants in…
Now I just need to lower my table and scrogg everything down and add nutrients…
Only running 4 this time because that’s I’ll I had that was ready to go in there…
4 Likes
4 Likes
Now, I really get it. 
, everything is so thought out @peachfuzz. thanks for showing me, .
ill go mains electrician or specialized trade, or Forman/ project manager/ builder, someone who told people what to do. my guess.
I was like walls, I was thinking panda film, and I was like… I don’t fully get the point, now I do its essentially a light reflector extender… cool man… with access
im going wit a 6 inch because I have led lights and I saw a youtube vid I liked, and he said 6 would be enough, then the last thing is if its positively or negatively charged, I think im going to have it negatively charged with the carbon filter in top of the tent and draws to the top through the side vents at the bottom with light baffles. positively charged sound good for pests though, I could have the light baffle vents at the top and have it positively charged for pests…
4 plants does it matter? im always stoked your around. I couldn’t have come this far without your help… my cousin… was a bit annoying and its because of ego, he knew better, I was like bud if I wanted to grow like that they would be outside, and I have grown like that plenty ands its hard for him because inside has some big differences, all to do with efficiency, and im just like don’t worry my online friends have got me… first online friends, but it is good…I would trust half of the growers on here to look after my grow and probably do a better job of me… the truth cant be said for a lot of……… almost any of my friends. maybe a girl friend… girls don’t have that… hmmm “well sonny ive been growing weed for 30 years attitude”… id worry they do something to “help”…
But seriously my first online group of friends known to each other fleeting glimpses of hands and the way peoples brains work, and the weed they grow… its cool. 
also having the common goal of avoiding going to grandaddy’s love shack in the swamp as he call it where he likes to pounce…
1 Like
@peachfuzz, how far apart do u have the nets? thx
What do you mean…?
Bottom squares are 6 inch…
Top squares are 4 inch…
Top table is 8 inches above bottom table…
I think I answered what you were asking…
I think 8 inches between tables is the perfect spread… when I scrogg everything down to the first table day 1 of flower , by the end of the 3 week stretch the plants are usually making there way to the top net and by the time they start to put on the weight the top net is there for support…
If everything goes right…
2 Likes
perfect thankyou.
1 Like
ok, I forgot what you said while I was at the shops @peachfuzz, and its made out of inch… I also have three foot under 4 2/3 ft… I don’t think this will be an issue, but if it is I just need more conduit, and I can recut because I haven’t glued,
so I have my fan, I had $200 credit at the hydro shop so I just got one there it does 315 cfm.
and I got a big air pump 80 lpm.
3 Likes
…. score, my dealers flatmates keeps giving me seeds, im pretty sure he helps in the bagging, or he goes in when hes not around and grabs the bottom of the pound bag. either way im stoked. im just going to date them and keep on with what im doing.
I may smoke the cone or two of weed in there… shouldn’t go to waste…
5 Likes