I dont know my dry wait still have to chop but I totally attribute most of how mine turned out to those hlg lights.
Yeah the hlg quantum boards were what i was looking at. I just have no idea how muh to get
What size space? I lurked in mattybears qb grow log for a few months and knew that’s how I was going. The proof was in the pudding.
Me personally, I will tell you what I just did, because the photo boost strips are still on back order till august, I ordered some chilled logic pucks and going to build some of them.
Yeah those boost strips look intriguing to me also.hehe
I am on the email list waiting. should have got them before he ran out. oh well, these are very good, I will be getting 2.48 umol/j with the deep red 660 nm
A 5x5x6.5 tent
Those look cool just skimmed an hlg vs the pucks article. Interested in the pucks for sure.
@zparkie2 eventually I might go to a 4x4 tent just for ease of maintenance and movement. Dbrn told me ide have to use 8 hlg v2 120 boards basically twice what I have.
A 600 watt hps puts out a lot more light than the fixture linked in first post.
Watts per square foot isn’t a great measure, it doesn’t take into account how much ppf per watt. A light like this usually tests out to between 1 and 1.5. The current lights from hlg run about 2.5. Saying you grow with leds is like saying you drive a car. There is so much difference between bottom of the line to top of line, that there’s not a single statement that could be made to compare them.
Im using the light i linked as supplemental light in combination with my 600 hps.
When i eventually go full LED how do i figure out how much light i need for a 5x5 space?
The best way would be use daily light integral recommended for cannabis.a 5x5 is about 2.3m². So to hit a ppfd average of 800 umols per second you would be looking for total flux of 1840 umols per second. Thats point of diminishing returns on ambient co2 anyway. Flowering with ppfd average of 600 umols/s is considered pretty good, so a total flux of about 1380 umols/s there.
Figure anything from the 1380 to 1840 ppf should do pretty good. That’s like 6 qb 288 running at 2.1 amps. Several other configurations could get you there too.
Awesome, thank you!! That gives me a good starting place.
No problem. If you stay with reputable light manufacturers the total flux of light is how they determine recommended space. Most of the Amazon lights try to portray a single point measurement from center of light as total flux, that’s not the case.
Do you by chance know of any resources where i can learn more about lighting? Like the hows and whys behind it all
You’re talking to the man now you’re in good hands. Hello @dbrn32
I’m not really sure about one place where you could find everything you could possibly want to know. But jump on YouTube. Greengene, growmau5, led gardener all have some really good stuff.
@dbrn32 alright good to know about wat per foot
Hey @dbrn32 i finally have money to get LEDs and i wanted to just clarify something with you. I am comparing the hlg qb132 v2 to the qb 288 v2. The hlg website lists the following info for both boards running at about 50% power.
Qb132 @ 1.4 A is 47 W and 2.67umol/ J
Qb288 @ 2.1 A is 102 W and 2.63umol/ J
Therefore off of a set of 4 132s i could get total flux of 500 (47x2.67x4)
Off a 288 kit (2 boards) i could get a total flux of 536 (102x2.63x2)
Did i do those calculations correct?
The reason i ask is because the 132s appeal more to me for a few reasons 1 being no heat sink required and 2 they are quite a bit less expensive. I can build the 132s for about 275 whereas the 288s cost 350.
Thanks for any help you can offer.
Going with 4 132 boards as opposed to two 288’s is close enough to a wash that you should go with whichever you feel fits you the best. The one thing I would consider is that the $350 qb kit comes with everything you need. If you were to source the 288 boards and heatsinks with rest of the stuff would be closer to $300. So pretty close in terms of building with either, but you pay little more for convenience of kit.