Yeah you’re right haha.
How fast do you think i should see changes or improvements? I’m a bit nervous, especially about the right one with the weird pH
They don’t have a lot of fan leaves left, dont know if the small leaves on the buds will be enough to get them through to mid october
1 Like
You should start seeing positive results over the next few days
1 Like
I shake too much.
Solved the viewing problem with USB Microscope or coin viewer and cut tester for viewing.
My new favorite, is the coin viewer.
1 Like
Staked out and Tied to keep wind damage to minimum.
1 Like
thought about that too but than i realized i still have the fan blowing which causes them to ove. So im gonna try by turning him off while im looking at them first
so they stopped getting worse for sure and i started taking photos every day to see if they get better. I feel they look better and not so droopy.
But i noticed the top one starting to grow weirdly on the buds. They startet to get extra “heads” if that makes sense:
after some research i think it could either be normal filling out of the buds or foxtailing. If i understand correctly foxtailing is often caused by too much light. Which doesnt make sense for the canopy line since they are ~50 cm away from the light
and even if as far as i read foxtailing isnt the worst
1 Like
My plants move in the outdoor wind, all the time.
Stabilized for gale protection, as Island and location funnel wind.
Only broke two knuckle joints, partially, when stretching out.
One, initially and one the second stretch out.
Recovered in a day with half knuckle still open (back then)
Tent fan is always required, in my grow, else the tent drips , as do the plants inside.
I released 3000 ladybugs this week in the tent and outdoors.
Overkill, but cheaper on the shipping and quantity.
They arrived hungry and ready for freedom.
That’s often times the culprit, could be genetics as well
Fed them yesterday:
|
Maya |
Ivar |
Clara |
Water total / Runoff |
3.0 l / 0.1 l |
3.0 l / 0.3 l |
3.0 l / 0.1 l |
Nutrients |
100% Flower Week 7 + 3.6ml CalMag |
100% Flower Week 7 + 3.6ml CalMag |
100% Flower Week 7 + 3.6ml CalMag |
PPM (in/out) |
1.400 / 1.650 |
1.360 / 1.450 |
1.380 / 1.580 |
pH (in/out) |
6.0 / 7.2 |
5.9 / 7.1 |
5.8 / 7.3 |
Honestly don´t know how the runoff pH can be this high again already. But i won´t be able to flush again, no time. Maybe something else is off since they start to yellow again. Especially the top one, which is also foxtailing quite a bit it seems:
But they also are pretty far into flower according to the seed bank (45-55 days flower period)
Also visibly starting to seem pretty mature. Top and right one are fairly far on browning pistils. Only the right one seems to just start now with browning pistils.
Top one:
Right one:
Left one:
So maybe the yellowing is part of the late flowering process.
@OGIncognito can i get them through until harvest like that? I´m willing to take loss in quantity/quality but I can´t really flush again They look far along in my eyes. They filled out nicely and smell a lot. And the pistils are also on the way (except the left one)
Cheers
@OGIncognito don´t know if you saw my post but unfortunately the right one got bud rot : Mold or Bud rot?
had to chop a good piece. Maybe that´s the reason they show deficiencies/illness
tomorrow i´ll inspect the other 2 and will get the RH under 55% to prevent it from returning. That will raise temps but the rot was a pain to deal with
1 Like
Keep the air circulating and exhausting as much as possible Grow Bro
1 Like
I am but it was extremely hot and humid last week 33C and 70% rh consistantly
It shot up
*edit to 72% at night in the tent
I believed lower temps are better than lower humidity, lets just say my view drastically changed i got both dehumidifiers running even though temps get up to 28C in the lung room ( will be 30-31C in tent) or even higher when it gets warmer outside
I read something about making a 0.5% baking soda solution and spray them, might try that
Got any more advise? Would be appreciated
Haven´t been active since i prepared a lot for the early harvest
Watering 6 days ago
|
Maya |
Ivar |
Clara |
Water total / Runoff |
3.0 l / - |
3.0 l / - |
3.0 l / - |
Nutrients |
100% Flower Week 8 + 3.6ml CalMag |
100% Flower Week 8 + 3.6ml CalMag |
100% Flower Week 8 + 3.6ml CalMag |
PPM (in/out) |
1.470 / - |
1.360 / - |
1.370 / - |
pH (in/out) |
6.2 / - |
6.2 / - |
6.2 / - |
Watering 3 days ago:
|
Maya |
Ivar |
Clara |
Water total / Runoff |
4.0 l / 0.4 l |
4.0 l / 0.4 l |
4.0 l / 0.4 l |
Nutrients |
100% Flower Week 8 + 4.8ml CalMag |
100% Flower Week 8 + 4.8ml CalMag |
100% Flower Week 8 + 4.8ml CalMag |
PPM (in/out) |
1.450 / 2.380 |
1.360 / 1.790 |
1.370 / 2.300 |
pH (in/out) |
6.3 / 7.3 |
6.3 / 7.3 |
6.3/ 7.3 |
Found some more rot on one of the biggest bud sites that arent the main colas and cut it out
Now i prepare for a wet trim + inspection for rot and bud wash next tuesday. Trimming shears, hydrogen peroxide arrived today. got some trim trays as well to catch the pollen
Preparing the basement for putting the tent there.
At the moment its 65F/57%. With the RH i want to be at the lower side towards 50% to reduce mold/rot risk further
I’m growing autoflowers using Gaia green dry amendments. I’m 48 days into flower and keep my temps around 72-78 during lights on and 68-72 lights off. I keep the humidity at around 40-46% lights on and off. If you have a ac unit I would definitely recommend using that. I also have a dehumidifier constantly running fighting the rh just so it doesn’t get up that high. The highest I got was around 55% but that’s because I forgot to go back in and drain the pots after watering. If you have the ability to do so it’s not a bad idea. I just run a hose to allow my dehumidifier to constantly drain as well. Currently going through a little rough patch myself with a potential salt buildup. So today I will be flushing with 6.4 tap water un chlorinated. Then following up with a small feeding maybe 3-4 tbsp and 1ml of cal mag in a gallon of water. I’m roughly about two weeks maybe 3 from harvest.
This one is from September 2nd
This is yesterday when i noticed a lot of spreading that caused me to wanna do a flush.
Unfortunately dont have an AC unit, but the cold weather came to save me am now at 77F 45%RH even without dehumidifier. In the basement im close to 60F and 50%RH, here is where im going to dry
1 Like
It took forever but its done. I knew it would take long but holy cow. Spent trimming until 1 AM (10hrs!!) without a break or even eating. Went to sleep and got up at 6:30 to do the bud wash. Finally got them dry enough and hung into tent and went to work.
Coffee is going to drag me through the day
1 Like
Also found one single seed. Havent found any others or any pollen sacs
Thanks my man. Gonna dedicate my first smoke to you and your help!
Found out that one of my neighbors outdoor plants hermied hard. So that might be the reason for the single seed.
Is the potency still reduced if its only one seed? And can they still pollinate after being harvested?
Pretty sure the peroxide wash killed the pollen but want to know if i have to be careful in the future