So i noticed yesterday when watering the plants my lights suddenly clicked of for maybe 3 seconds then came back on then another 30 seconds or so they did the same thing. I’m running an auto program for the inline exhaust using high temp and high humidity for triggers, then another program for clip on fan setup the same way, also a humidifier set to low humidity trigger lights are set to auto with a start time and end time. So i think what is happening is when my exhaust fan ramps up or down it appears it briefly cuts power to my lights reason i think this is it happened after i opened my tent the fan ramped down as the temp dropped. Has anyone else had this issue?? I may have to just plug the lights into a timer instead @Bracketh @Ebb @SeaOhAreWhy @Newt @DEEPDIVERDAVE
Have not experienced this but will be keeping a closer eye.
I had a similar experience about a year ago when setting up my AC Infinity tent. My controller and fans are all ACI. But, my light is an HLG 350R.
To connect my light to my controller I had to use an adapter cable. I was trying to get everything to work from my controller.
My light would cut off an on similar to what you described. Called HLG and ACI but never got it resolved.
So, I hooked up a digital outlet timer. Plugged my light into that and it has worked perfectly. I have a supplemental light strip in my tent and both operate from the one outlet timer.
Just wanted to give you an option if you can’t resolve your lighting issue.
@Zudnik I have not had that problem. I have heard of it though on other forums. Can’t remember exactly what caused it or what the fix was. I will see if I can find it, it’s been a while so not sure.
Greatly appreciate the insight , thought maybe i was loosing my mind or real stoned 
Thanks brother i appreciate that, ill post back if I find something I’ll post here also 
I have a Molex adapter that i dont need if anyone wants it just shoot me a shipping address. I dont need it…
This is exactly what i just did. The same Vivosun timer also!
No help here. But first thing I’d do is make sure nothing is loose.
Thanks anyway brother newt. I checked everything ,still scratching my head 
, seems very random and lasts a few seconds so not a huge deal. Don’t really need to control light with the controller, it’ll open up a port for another clip on fan i guess
I got mt 69pro today cant get the temp prove to read temp or humm. Any ideas. Thanks
So make sure something is plugged into it as far as what you want to control with it, that is where it gets its power from i believe and also be sure your probe is plugged in also that should do the trick 
Thanks buddy, i think i was over medicated. The prove was not pluged in all the way. I got it now.
yup we’ve all been there
When I first set mine up I forgot to take off the rubber cap, and took me a full day of messing with settimgs and everything before I figured it out. 
They are confusing, the 69pro… ive been messing with my settings and finally have it running on auto.
I wouldn’t say confusing so much as just technical. I would recommend not using auto and using the advanced tab on the app. It has been seen when just using the auto setting that it can cause things to turn on and off. Using the advanced setting has seemed to fix that issue.
I also found that was the best way to set it up. Set it and forget it
I dont see any “advanced tab”? Wheres that? Nothing turns off or on in auto. It self regulates to reach the optimum temp and humidity i set…
Auto is advanced when you initially open the app and it shows your temps and humidity it says advanced at the bottom of ea. Equipment you programed i guess that just tells you you’re in auto mode