I have used 90 litre pots in the past.with the bruce strain still ok to use this size for a 7 week cycle
@ThcinKC Come on down to South Texas and bring that horse cock of a Cola with ya. We will party like we went back to 1999. 
3 Likes
Looking at getting the s8 infinity fan.do you need a 8 inch carbon filter to suit or do u go a bit smaller?
1 Like
yes its best to match fan and filter if filter is smaller than fan it will over work the filter etc
1 Like
https://www.amazon.com/AC-Infinity-CLOUDLINE-T8-Temperature/dp/B07BQS1GB9/?tag=greenrel-20
the t8 has better controller with it was recommended to me days ago i got the t4 and t8
1 Like
Thanks guys. I looked up that link and found filters to suit.but when I went on my amazon account I could not find same product.why is this
1 Like
what product u cant find the infinity fans
I found that on my account the carbon filter I found thro the link but went bak to my account and it’s not the same product’s
1 Like
the link above is to the t8 and u was looking at the s8 only difference is the controller on them if thats what u talking about
1 Like
Thanks !!
Nice…
Have a 6m x 3m room. Do i use 90litre pots 50litre pots and how many is would fit this room8 or 12
To get maximum yield out off a 6x3m room
How much money do you have to put into this room? And what would you hope for? Also what mediums would you wanna use?
1 Like
At least putting in atm with out babies or mediums 4k so far. Using bruce banner and med not sure yet.looking at trying to get 1.5 pound too 2 per plant
Medium will be hydro soil and clay rock
Well if that’s your ambition indoors then I’d recommend building your own LED’s, you can get the most for $$. You are looking at something like a 1 square meter plant, so you could store about 8 monsters in a 2X4 array.
XX XX
XX XX
Then just space properly for walking room between plants, and with these plants you for sure need to be able to work all around them.
As for LED’s you can go a few options, don’t buy blurple, if you want something full cycle, clone to flower you’re looking at something like 3k-4K light temp LEDS. This I recommend achieving by either quantum boards, or LED strips, both work, I have qb’s and they work amazing. For a 2 square meter rectangle, I’d recommend either 6qb’s and a deep red strip per plant, or 12 LED strips with deep red diodes. You will need drivers and heat sinks as well as (optional) dimming features, possible housing/cosmetics, extended plugs and wires(to place drivers outside grow area or designated cooling area). You also need wires, wagos, or other connection point with non conductive coating, rope clip hangers, secure points in ceiling. As well as your hydroponics setup and nutrient product line, ph kit, ppm meter(I forget what they’re called). I would advise to maybe buy some pvc pipe or cheap lumber and build SCROG frames, it’s optional but will really help with growing those Godzillas. If you don’t have fans already probably invest in some for room air circulation, as well as your room exhaust fans. Probably run a sub panel near this room for easier electrical load, and if you do it right it can be cheaper on the electric bill too. That should get you in the right direction @dbrn32 that sound about right for LED power? Also can anyone else sign off this list make sure I got everything
2 Likes
Sure that looks good.
Looks like op was considering 4x4, which is closer to 1.5m². Two of the 260xl kits or equivalent would be solid, probably $100 or so could be saved by building from scratch.
2 Likes