No amber and mid-level buds still have some clear.
1 Like
@Myfriendis410 is this what i think it is?
1 Like
Sure looks like it.
I sprayed it this morning after lights went out with a solution of 50ml 3% hp to one quart of water. Iāve never had this before. What is my next step?
This what I purchased for that:
The best option is to lower the humidity, and increase air flow, so the environment is unsuitable for WPM.
5 Likes
If you can reduce humidity to below 50% that would help. Continue spraying peroxide/water at lights on. You can try @Covertgrowerās method too. Remove some more leaves and increase airflow.
4 Likes
You either need a good dehumidifier or you need to start moving alot of air around and pulling it out at the same timeā¦
A spray bottle with 91% rubbing alcohol for everything in the room and a mixture of either neem oil or canola oil at a mixture of 2oz of oil and 1 gallon of good phād water and 5 drops of dawn dish soap and spray religiously top and bottom of leaves ā¦
Some people think that neem will make your weed taste like crap , Iāve never had that issue spraying up till harvest danm nearā¦
And you could always do a bud wash at harvest if necessary 
But you definitely have to get rid of the humidity in thereā¦
Humidity usually increases during lights out , thats what you need to monitor because thats probably when its at its worstā¦ 
4 Likes
I forgot to mention , that after spraying the plantās you will really need to be able to increase the airflow until they are close to dry atleastā¦
Hopefully you can get things under controlā¦ 
3 Likes
I was running about 40% humidity, and cut the dehumidifier off. Got up to 60% so i cut it back on. Definitely need to improve airflow when i get back tomorrow night. I also have 2 more dehumidifiers i can put in there if necessary.
2 Likes
Any chance youāre getting large enough swings in temp and rh to going from lights on to lights off and back on to cayse condensate on your leaves? This is like morning dew in late spring or early summer.
4 Likes
I will check when i get home tomorrow evening
1 Like
Picture was taken shortly after lights out.
2 Likes
You were right, little buddy. Humidity had gotten to 75%. I guess i shouldnāt have turned the dehumidifier off. RH back in the 40ās, exhaust fan turned to high, instead of low, fans reset to normal positions. Maybe we wonāt have this problem again.
4 Likes
Your plants will look a little scruffy after a few days of peroxide but nothing you can really do about it. Plants should recover fine. Plan on doing a bud wash at harvest.
4 Likes
@peachfuzz What is the latest in flower you have taken a clone?
I have some Runtz @6 1/2 weeks of flower. One plant seems to be pm resistant and has a better bud structure ie they are stacked alot better, and i wanted a mother. Is it too late?
Inquiring minds want to know
3 Likes
Iāve taken clones while i was harvesting ā¦
Sometimes Iāll harvest most of the plant and leave some material on the plant and just revegg, it just depends on the momentā¦
Just take clones from the bottom part of the plant thats still maturing and you should be goodā¦
5 Likes
That would be a āmonstercropā IIRC. Iāve taken clones in flower but usually use the first defol at day 21 in flower and take them then.
5 Likes
I agree with @Myfriendis410 ā¦
Best time to take clones is 2 to 3 weeks after light flipā¦
Thats when your plants are the most vigorous in their growthā¦
They will root super fastā¦
Anything later then that will be a lil finicky, but will clone , just takes a lil longerā¦
3 Likes
Whatās yāallās thoughts on adding molasses? Remember, Iām hydroponics. Got some for my worms, but heard it could be beneficial to my plants. Your thoughts on the subject appreciated.
1 Like
I havenāt used in hydroponics but Iām thinking there are probably cleaner carbloads to use for hydro applications.
5 Likes