@MattyBear @dbrn32 @MAXHeadRoom @Usmcjojo
I have just purchased the driver and it’s not working it has two adjustment knobs for output did I purchase the wrong driver? Hers pic
1 Like
What boards are you trying to light with it.
1 qd288 v1
2 Likes
I’m sure Rob will have you run some tests and will be by at some point. 
3 Likes
Do you have a volt meter.
Did you double check your plug connections. Plug that goes into the wall.
Did you double check connections to board.
I know this sounds stupid to do but with this setup one bad connection and the light won’t work.
This driver is one that they recommend for your board so the driver is right.
2 Likes
Assuming wiring is correct. Turn voltage pot all the way up and the current somewhere between all the way down and half way.
1 Like
@dbrn32 @MAXHeadRoom @MattyBear
Well low and behold the negative and positive from driver to board was backwards on my part/negligence. Thanks for advice and now my qb288 v1 135w light now works and will start duty on a GSCE from ILGM in a 2x2x6 tent. Im shooting for 1/2 pound or more of good green from this girl with 2 months veg time. I should be close if everything goes right. Here’s the setup with pics sorry for cardboard box but the unknown plant I had is drying and this tent will be up and running sometime next week. I have dropped and germinated a GSCE and she’s in her starter pot waiting to be transplanted to her forever home in week or two
4 Likes
Right on! Best of luck with the grow!
2 Likes
Glad you got it to work.
1 Like
You’re plenty free to adjust voltage and current as needed too. I was just suggesting those settings while you were trying to figure out what was going on.
1 Like
Most definitely on power adjustment and thanks guys. A simple mistake or me rushing had me stumped and it pays to take your time.
Thanks and keep it growing
5 Likes
@Junebugg @dbrn32 @MattyBear @Zombo @BIGE @MAXHeadRoom @raustin @peachfuzz @Dr.DankThumb420 @Big123
Well here’s a week and day update of my 7 babies 3 bubba kush autos, 3 green crack autos, and 1 trainwreck fem(late addition as GSCE didn’t make it so replaced with this).
One of the bubba kush started out deformed but is catching on and starting to shoot out normal looking leaves now
Plant 2 is kicking but and loving the QB boards
Plant 3 is the replant of the bubba kush I broke the tap root for
All 3 bubba kushs
Now on to the green crack autos which are all looking good
Plant 1
Plant 2
Plant 3
All 3 green crack
Here’s my trainwreck she was bubble bathe for 24 hrs and now in her starter pot
Hope you enjoy and happy Sunday to all
9 Likes
Hey @MattyBear
I’m trying to be like you with the harvesting every month
4 Likes
Looks like you’re off to a good start!
3 Likes
I’d say you’re on your way!
2 Likes
Welcome to the world of Mrs trainwreck.
Come along for the ride Choo Choooooooooo
@Junebugg @dbrn32 @MattyBear @Zombo @BIGE @MAXHeadRoom @raustin @peachfuzz @Dr.DankThumb420 @Big123
10 Likes
Who are those lovely ladies in the background?? 
thats some pretty buddery there my friend… how far?
2 Likes
They are GG#4 autos should be done in next week or two hopefully
3 Likes
I checkout my bubba kush and she was wanting to stretch. So me took to a lil session of LST and hopefully she responds well to it. I used cut to length hangers to LST her to outside of pot. Probably not the best to tie down with but was a easy way to do it.
@Junebugg @dbrn32 @MattyBear @Zombo @BIGE @MAXHeadRoom @raustin @peachfuzz @Dr.DankThumb420 @Big123
10 Likes