# Tent Pole Needed

**URL:** <https://ilgmforum.com/t/tent-pole-needed/112273>\
**Category:** Grow Boxes & Tents\
**Created:** [July 10, 2024, 11:27pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273 "2024-07-10T23:27:05Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Show-dog](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@Show-dog](https://ilgmforum.com/u/Show-dog)\
**Post date:** [July 10, 2024, 11:27pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273/1 "2024-07-10T23:27:05Z")

</div>

I looked and I couldn’t find a thread so here I am! I am looking for pole C for a Vivosun 5x5 tent, does anyone have parts for sale or barter or free?

---

<div class="post-metadata">

**Author:** ![Storm](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/storm/32/1066086_2.png) [@Storm](https://ilgmforum.com/u/Storm)\
**Post date:** [July 11, 2024, 3:03am UTC](https://ilgmforum.com/t/tent-pole-needed/112273/2 "2024-07-11T03:03:40Z")

</div>

I have used pvc. Tubing. Whatever i could find at hardware store when i break or lose 1. 5x5 is just a box with a shell covering it. Easier to rig it than you realize…

---

<div class="post-metadata">

**Author:** ![Show-dog](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@Show-dog](https://ilgmforum.com/u/Show-dog)\
**Post date:** [July 11, 2024, 11:08pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273/3 "2024-07-11T23:08:53Z")

</div>

Thanks for the advice, I never considered pvc.

---

<div class="post-metadata">

**Author:** ![Storm](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/storm/32/1066086_2.png) [@Storm](https://ilgmforum.com/u/Storm)\
**Post date:** [July 11, 2024, 11:10pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273/4 "2024-07-11T23:10:02Z")

</div>

I have a 4x4 almost half pvc in storage. Pole/3way joint/ poles.

---

<div class="post-metadata">

**Author:** ![kellydans](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/kellydans/32/580751_2.png) [@kellydans](https://ilgmforum.com/u/kellydans)\
**Post date:** [July 11, 2024, 11:24pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273/5 "2024-07-11T23:24:12Z")

</div>

I Use PVC on the sides held with tie wraps. With the negative pressure inside the tent with walls sucked in you lose a lot of space. With the extra support in the middle on the sides , you gain a few inches on all 4 sides. As mentioned get created with your pole.  
Good luck ✌

---

<div class="post-metadata">

**Author:** ![Smokesdaily](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/smokesdaily/32/1097801_2.png) [@Smokesdaily](https://ilgmforum.com/u/Smokesdaily)\
**Post date:** [July 12, 2024, 7:30am UTC](https://ilgmforum.com/t/tent-pole-needed/112273/6 "2024-07-12T07:30:58Z")

</div>

Is that the Hang bar? If so I’m pretty sure amazon sells them.

---

<div class="post-metadata">

**Author:** ![Show-dog](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@Show-dog](https://ilgmforum.com/u/Show-dog)\
**Post date:** [July 12, 2024, 10:14am UTC](https://ilgmforum.com/t/tent-pole-needed/112273/7 "2024-07-12T10:14:06Z")

</div>

No, it’s pole C which Vivosun has listed on their website for $19 but it’s been out of stock for at least 6 months.

---

<div class="post-metadata">

**Author:** ![DRsDank](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/drsdank/32/628580_2.png) [@DRsDank](https://ilgmforum.com/u/DRsDank)\
**Post date:** [July 12, 2024, 4:47pm UTC](https://ilgmforum.com/t/tent-pole-needed/112273/8 "2024-07-12T16:47:31Z")

</div>

Wire conduit get size that will just fit over other poles drill hole threw both poles put bolt threw done and strong. Basicly same material tent pole is made of.