Preparing for Ohio Legalization, narrowed down to Cmh, or Qb roughly 3x3 to 4x4 grow space

Just thought i would put up the two new models, what about this one @DoobieNoobie

The SSK-550 Kit LED Lamp

will replace a single-ended 1000W HID while only drawing 480watts at the wall and delivering nearly 1200 umol/s with an efficacy of 2.53 umol/j.

TSlot rail mount package allows for

Re positioning of boards

Adding more Skins by just adding more rail

Reduces shipping cost

Features

High-efficiency custom-designed white light metal core boards with Samsung LM301B diodes

3000K and 4000k white-light full spectrum for optimal canopy penetration

Do you have a components list? Where did you obtain the strips?

Arrow electronics is where I would go. Quantity discount 25 or more is down to $11, and there is 10% code for new customers

Each light consists of 8 SI-B8U261560WW Samsung strips. 1 hlg-185h-c1050b, 8 .61" heatsinks from heatsinkusa 23" long. And 2x 1/2" x 18 inch u channel. Plus 1 1/2"x23" piece of U channel in the center to mount the driver. The U channel I buy 8’ long pieces from grainger and cut to size. The heatsink are connected with 1/2" long self tapping screws. The strips are mounted using double sided thermal tape. And you’ll need a small spool of 300 volt solid core 18 gauge wire. Plus wago connectors for the wiring. I use 9’ tool replacement power cords found on Amazon for about $3 for power cord. If any other details are needed just ask. The big key to price is ordering in bulk. 25 strips gives the best discount from arrow on strips. I order 26 make 3 big lights and 1 small 50 watt light with the extra 2 built the same as the big ones just a smaller driver.

Thanx for the details!

No problem and like I said I’m here to help with more pics and step by step even if needed. Oh I did forget to add I use cased potentiometers from rapid led for dimming.

Those have some nice efficiencies for 2017 strips. And it makes it much easier to spread the light across more space.
Data sheet link: https://static6.arrow.com/aropdfconversion/2b54d5326bc5bdd51048aed13ae69d3dc55ced38/f-series_gen3_rev0.0_2017-01-05.pdf

It’s the same diodes used in the v1 quantum boards. And running them at the level they’re on in my setup they stay pretty cool with the spread. I can say in my 5x4 room 3 of them on full power was almost a bit too much light. But light spread was perfect and penetration was excellent.

@dbrn32 So by my math ~4.5 of these strips equals 1x288V2 or ~19800lms

So for a 5x5 you would need ~28/29 of these strips and the associated power supplies (783 total W. Constant current @1050mA)

@DoobieNoobie but you ran 9 strips off a 185? Wouldn’t that be Watt limited for the draw @27W each? How much watts do 9 pull actual?

That’s $329 for the strips, ~$180 for PS and ~$50 for everything else. $560 for a 5x5. Amazing!

No I ran 8 strips. 9 is to many for that driver.

You forgot heatsinks which was $70 I think for 26 of them. But still cheaper than any other light of that quality.

Interesting build article here. They hook them in parallel with a 48A constant voltage PS. (This doesn’t make sense to me because they are rated for 24.2 max V? @dbrn32)

Wouldn’t U channel aluminum be enough as a heatsink? I used 1/8” aluminum for my QB304’s and it was enough.

It might be. But it works out to almost the same price only a few dollars difference so in my opinion I’d rather pay $20 or so more to get more efficient heat dispersion.

Agree. I’m cheap.:smile:

I am not dissatisfied with my 304’s but I wish I knew about these. I definitely get some hot spots with the QB’s I wish I could have avoided.

You guys definitely on right path.

@WickedAle there are several build models there. I believe the 48v cv/cc driver build is using the double row f-series strips.

I’ve never ran the numbers on matching qb’s. But I believe running the single row f-series at 1050ma is about same efficacy as running v1 QB-288 at 2100ma. If you hold efficacy, 200 watts of strips would be equal to 200 watts of qb’s.

They’re definitely better in that aspect. You can custom shape them to fit your space. Which is what I did.

You can probably come up with low cost solution for that. Add some strips to where you need coverage at maybe a little lower power level than typical, and then dim your qb’s some.

The strips and the qb’s would both run a little more efficient that way, and you can hold or increase your intensity levels with similar or less power. You would also balance out your canopy intensity.