# Ph Perfect technologys 3 part from advanced nutrients **URL:** \ **Category:** Nutrients\ **Created:** [June 12, 2020, 11:47pm UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952 "2020-06-12T23:47:05Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Tazzie](https://avatars.discourse-cdn.com/v4/letter/t/ce7236/32.png) [@Tazzie](https://ilgmforum.com/u/Tazzie)\ **Post date:** [June 12, 2020, 11:47pm UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952/1 "2020-06-12T23:47:05Z")
First time grower I have a few questions about using this product.Like am i to feed this to my plants through out the entire grow??? And when do i start ???and one more …I have just the three part nutrients but there is a complete pack that has like 7 or 8 more bottles that i dont have. Do i need to get them to ---
**Author:** ![Cap\_Ron](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/cap_ron/32/305886_2.png) [@Cap\_Ron](https://ilgmforum.com/u/Cap_Ron)\ **Post date:** [June 13, 2020, 12:44am UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952/2 "2020-06-13T00:44:17Z")
If I’m thinking of the correct product line I believe you’ll need 3 bottles for vegetative growth and then another 3 for the bloom phase. It would be a “grow”, “micro”, and “bloom” for each phase. Those are your base nutrients. The other bottles are additives, they help a lot, but they’re not 100% necessary. Check out the nutrient calculator on AN’s website, it will lay it out for you. > **[Nutrient Calculator | Feeding Schedule | Advanced Nutrients](https://www.advancednutrients.com/nutrient-calculator/)** > > Use scientifically proven feed charts and grower tested feeding schedules designed to maximize your plants growth & yields! ---
**Author:** ![Tazzie](https://avatars.discourse-cdn.com/v4/letter/t/ce7236/32.png) [@Tazzie](https://ilgmforum.com/u/Tazzie)\ **Post date:** [June 13, 2020, 2:15am UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952/3 "2020-06-13T02:15:11Z")
Thanks Cap\_Ron I’ll definitely look at the feedings chart. The directions on the bottles are vage.and the. U-tube video aren’t much better. I appreciate your support and time…TAZZIE ---
**Author:** ![Cap\_Ron](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/cap_ron/32/305886_2.png) [@Cap\_Ron](https://ilgmforum.com/u/Cap_Ron)\ **Post date:** [June 13, 2020, 3:02am UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952/4 "2020-06-13T03:02:52Z")
No problem @Tazzie. One important thing I forgot to mention earlier is use much less than the manufacturer’s recommended amount on the nutrient schedule. I started using AN nutrients a couple of months ago. I haven’t used more than half of the recommended doses yet, and my plants are doing great with it. ---
**Author:** ![Malikss](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@Malikss](https://ilgmforum.com/u/Malikss)\ **Post date:** [December 31, 2020, 7:45pm UTC](https://ilgmforum.com/t/ph-perfect-technologys-3-part-from-advanced-nutrients/46952/5 "2020-12-31T19:45:45Z")
The PH in my domestic water at home is 7.5 , so i added 5 ml per gallon PK booster because the plant is in the early flowering stage so i measured the ppm it mentioned 1100 so it’s good but the PH when i added the PK booster droped to 5.20 so i added some baking soda to raised the PH up it works and i get the result i want 6.0 PH but the PPM raised to 1700 when i added baking soda !!! So how can i adjust the PH level (6.0) while i want my PPM level to stay the same (1100) ?? NOTE: in my country we dont have Ph down and PH up thats why im using baking soda !!!