# Let's talk DIY lights

**URL:** <https://ilgmforum.com/t/lets-talk-diy-lights/13186>\
**Category:** Lighting\
**Created:** [July 13, 2017, 9:22pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186 "2017-07-13T21:22:36Z")\
**Posts on this page:** 20\
**Page:** 281

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 17, 2019, 1:17pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5622 "2019-04-17T13:17:13Z")

</div>

Ya, @Covertgrower pointed them out a couple weeks back.

I think they would be a really nice upgrade for someone that did an early generation vero 29 build.

---

<div class="post-metadata">

**Author:** ![Covertgrower](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/covertgrower/32/423081_2.png) [@Covertgrower](https://ilgmforum.com/u/Covertgrower)\
**Post date:** [April 17, 2019, 1:30pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5623 "2019-04-17T13:30:36Z")

</div>

I think it’s a good idea. You guys see they have those strip lights at HLG now? Probably been there for awhile. I just noticed those.

---

<div class="post-metadata">

**Author:** ![boardsbird](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/boardsbird/32/127969_2.png) [@boardsbird](https://ilgmforum.com/u/boardsbird)\
**Post date:** [April 17, 2019, 1:44pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5624 "2019-04-17T13:44:50Z")

</div>

Maybe use 2 of the QB144 as a amazon cob DIY

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 17, 2019, 3:58pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5625 "2019-04-17T15:58:33Z")

</div>

They’re expensive for what they are.

---

<div class="post-metadata">

**Author:** ![WickedAle](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/wickedale/32/137618_2.png) [@WickedAle](https://ilgmforum.com/u/WickedAle)\
**Post date:** [April 19, 2019, 7:32pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5626 "2019-04-19T19:32:23Z")

</div>

Just wanted to reference a @DoobieNoobie build utilizing SI-B8U261560WW Samsung strips in another thread. A really inexpensive custom configuration!;

[Preparing for Ohio Legalization, narrowed down to Cmh, or Qb roughly 3x3 to 4x4 grow space - #102 by WickedAle](https://ilgmforum.com/t/preparing-for-ohio-legalization-narrowed-down-to-cmh-or-qb-roughly-3x3-to-4x4-grow-space/30115/102)

---

<div class="post-metadata">

**Author:** ![Newgrwr2018](https://avatars.discourse-cdn.com/v4/letter/n/a6a055/32.png) [@Newgrwr2018](https://ilgmforum.com/u/Newgrwr2018)\
**Post date:** [April 22, 2019, 5:33pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5627 "2019-04-22T17:33:21Z")

</div>

How many square feet will four of those qb144s cover?

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 22, 2019, 5:36pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5628 "2019-04-22T17:36:25Z")

</div>

Depends on drive current. They haven’t really put specs up either. I would expect up to a 3x3 for 4 of them.

---

<div class="post-metadata">

**Author:** ![BIGE](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/bige/32/34832_2.png) [@BIGE](https://ilgmforum.com/u/BIGE)\
**Post date:** [April 23, 2019, 12:37pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5629 "2019-04-23T12:37:03Z")

</div>

always great content in this thread @dbrn32

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 23, 2019, 12:44pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5630 "2019-04-23T12:44:39Z")

</div>

Seems like not as much as in past. We’ve been shopping for new home and busy trying to keep walking natural disaster out of trouble. Hopefully things will slow down a little soon and I’ll get into new build or something soon.

---

<div class="post-metadata">

**Author:** ![BIGE](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/bige/32/34832_2.png) [@BIGE](https://ilgmforum.com/u/BIGE)\
**Post date:** [April 23, 2019, 12:50pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5631 "2019-04-23T12:50:45Z")

</div>

yea,stuff seems to work itself out ,one way or another… i’m glad i’m done with the house hunting…i feel for you there. i should show you a pic of some of my kids ‘‘did i do that’’ moments…

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 5:03pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5632 "2019-04-23T17:03:09Z")

</div>

So I screwed the pooch on ordering heatsinks for my new strips which are 11" long, well…so are the heatsinks because I wasn’t thinking. Any suggestions on how I would mount the heatsinks to a piece of flat aluminum? JB weld? Open to suggestions!! Thanks

 ![20190423_115946](https://global.discourse-cdn.com/growingmarijuana/original/3X/a/6/a6c5cc8887fe8ab027653b33d2efb2179dd08cdd.jpeg)

---

<div class="post-metadata">

**Author:** ![DoobieNoobie](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/doobienoobie/32/235851_2.png) [@DoobieNoobie](https://ilgmforum.com/u/DoobieNoobie)\
**Post date:** [April 23, 2019, 5:34pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5633 "2019-04-23T17:34:17Z")

</div>

Do you know any tig welders? Short of that I don’t know much else I’d trust to hold without failing.

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 5:39pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5634 "2019-04-23T17:39:52Z")

</div>

No but I found an aluminum welding kit for little stuff here and there at harbor freight. Apprently you just use a torch and burn it in. I also saw heat resistant JB Weld and if I cut some groves to enhance the bond I think it would work out. I have though about hitting up a fab shop and just having em tac it.

---

<div class="post-metadata">

**Author:** ![DoobieNoobie](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/doobienoobie/32/235851_2.png) [@DoobieNoobie](https://ilgmforum.com/u/DoobieNoobie)\
**Post date:** [April 23, 2019, 5:56pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5635 "2019-04-23T17:56:27Z")

</div>

Yeah those little aluminum welding kits aren’t really welding. It’s more like soldering. It might hold but might not last forever. And to much flexing it will likely break. I’d probably try the jb weld over that but it’s not a super clean method. Tig welding would be the preferred method for permanent bond and cleanest look. If I was going to use any of the other methods I’d definitely drill holes so that it goes through the long piece and increases bonding area.

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 23, 2019, 6:29pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5636 "2019-04-23T18:29:13Z")

</div>

I would say the harbor freight kit isn’t worth wasting time on, but someone will come posting pics to contradict lol.

What about getting a piece of angle and cutting it into small L brackets, then attaching to each with a few screws.

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 7:24pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5637 "2019-04-23T19:24:10Z")

</div>

Can I drill sideways into the fins?

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 7:46pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5638 "2019-04-23T19:46:41Z")

</div>

I will just drill into the sides of the heat sink then

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [April 23, 2019, 8:08pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5639 "2019-04-23T20:08:34Z")

</div>

Ya. I would be careful using something like self taper tho.

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 8:10pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5640 "2019-04-23T20:10:05Z")

</div>

I just picked up this and it matches the height of the heatsinks

 ![1556050125865656732895](https://global.discourse-cdn.com/growingmarijuana/original/3X/e/0/e0ab284d58c8f1fa5a0e5b551346755a0a5094e0.jpeg)

---

<div class="post-metadata">

**Author:** ![imSICKkid](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/imsickkid/32/550192_2.png) [@imSICKkid](https://ilgmforum.com/u/imSICKkid)\
**Post date:** [April 23, 2019, 9:56pm UTC](https://ilgmforum.com/t/lets-talk-diy-lights/13186/5641 "2019-04-23T21:56:31Z")

</div>

Got the L brackets cut.

 ![20190423_165537](https://global.discourse-cdn.com/growingmarijuana/original/3X/4/1/4190d040aaf9bf26b6672a23796ad4f351df4886.jpeg)

[Previous page](https://ilgmforum.com/t/lets-talk-diy-lights/13186.md?page=280)

[Next page](https://ilgmforum.com/t/lets-talk-diy-lights/13186.md?page=282)
