# Got hit by mold

**URL:** <https://ilgmforum.com/t/got-hit-by-mold/17832>\
**Category:** Troubleshooting\
**Created:** [February 16, 2018, 2:11pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832 "2018-02-16T14:11:00Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 16, 2018, 2:11pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/1 "2018-02-16T14:11:00Z")

</div>

![IMG_0832](https://global.discourse-cdn.com/growingmarijuana/original/3X/8/4/842b74b52f41f6dcb0d83455c3e1105746c11b9f.jpg)

☝🏾 I just found this.this is one of the 2 biggest buds on this plant has mold.

👇🏾 this is the other.

 ![IMG_0833](https://global.discourse-cdn.com/growingmarijuana/original/3X/3/5/35aad1d98763492f1ea397e175ecf4a17bf81a1c.jpg)

So the 2 biggest buds on this plant had to be destroyed because of mold.

---

<div class="post-metadata">

**Author:** ![Countryboyjvd1971](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/countryboyjvd1971/32/102222_2.png) [@Countryboyjvd1971](https://ilgmforum.com/u/Countryboyjvd1971)\
**Post date:** [February 16, 2018, 2:25pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/2 "2018-02-16T14:25:44Z")

</div>

[![](https://global.discourse-cdn.com/growingmarijuana/original/4X/c/b/2/cb22ecac07c89fb21618bf8ff181e258965ec225.jpeg "Jorge Cervantes: Washing Away Powdery Mildew") ](https://www.youtube.com/watch?v=S7jE7qzfgQs)

Check out this video  
You can wash it off but you should take the buds now remove and effected areas and wash and hang to dry  
That looks more like it going to bud rot if you leave it going  
Your outdoors?  
I lost most of my outdoor grow last summer to bud rot

---

<div class="post-metadata">

**Author:** ![Countryboyjvd1971](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/countryboyjvd1971/32/102222_2.png) [@Countryboyjvd1971](https://ilgmforum.com/u/Countryboyjvd1971)\
**Post date:** [February 16, 2018, 2:51pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/4 "2018-02-16T14:51:04Z")

</div>

Yeah sound like start of bud rot  
Hate to say it but i would start thinking about harvesting early  
But rit can devastate a crop over night just my thoughts

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 16, 2018, 2:57pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/5 "2018-02-16T14:57:34Z")

</div>

ok 😤

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 16, 2018, 5:43pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/6 "2018-02-16T17:43:45Z")

</div>

could I buy myself some time by washing the plant it its pot?

Then blowing it off with a fan and a bit of sun?

As well as I was only able to get a 150ml 6% hydrogen peroxide. they only had that one bottle. Could that do if so how?

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 16, 2018, 6:02pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/7 "2018-02-16T18:02:44Z")

</div>

Could you recommend a great harvesting cleaning and curing methods

This is the plant.

 ![IMG_0851](https://global.discourse-cdn.com/growingmarijuana/original/3X/c/5/c52922c44b3816e255b3135893d520e4fa565e10.jpg)

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 16, 2018, 6:09pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/8 "2018-02-16T18:09:58Z")

</div>

I wanted to send her back to vegging do you think that’s a good idea?  
she is dense and sticky with a strong aroma.

---

<div class="post-metadata">

**Author:** ![Countryboyjvd1971](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/countryboyjvd1971/32/102222_2.png) [@Countryboyjvd1971](https://ilgmforum.com/u/Countryboyjvd1971)\
**Post date:** [February 16, 2018, 6:21pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/9 "2018-02-16T18:21:10Z")

</div>

I would take it down wash just like in video  
After removing and effected areas of the flower of course  
He also explains how to dry using a fan but that only for a few hours fir excess water from washing  
Once washed  
Hang in a dark room with a fan to move air around in room do not blow air directly on buds  
Ideally you want humidity in 55-60% range  
Hang 7-10 day until stems snap not bend  
Then trim to liking and put in mason jars with lids  
Burp jars twice a day for 20 min ea  
This will allow buds to off gas the chloroform and other gases that are ng at this time you want to check buds for any molding  
Do this for first two weeks after that  
Burp one a day for 2 more weeks  
Humidity in jars should stay around 55-60% ifeally  
Longer cure times better taste you can sample the bud once dry flavors and high will not be a highest potential tho  
As I mentioned i lost a whole outdoor grow cashing the mold removing bad buds and what not i cases it so long i lost 80% of the grow hardly worth my effort  
Sorry but I personally would cut my losses and do as described above @Candygrowja

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [February 20, 2018, 6:53pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/10 "2018-02-20T18:53:30Z")

</div>

I am seeing some sines of bud rot on another plant. as well as I’m trying to see how close I am or how fare past harvest I am because I don’t know. I want to know so I know if I should expect a couchlock or active high.

 ![IMG_0962](https://global.discourse-cdn.com/growingmarijuana/original/3X/d/d/dd9cef919c60d7d729332e91d6baeb2cd149a659.jpg)

Lower buds 👇🏾

 ![IMG_0964](https://global.discourse-cdn.com/growingmarijuana/original/3X/4/e/4e7954f893d852120aac375a42930b3ed6beeac5.jpg)

Attempting to see the heads 👇🏾😤

 ![IMG_0940](https://global.discourse-cdn.com/growingmarijuana/original/3X/1/2/12c5b94d3c16cc6e0164bcf2451704aee43f6935.jpg)

 ![IMG_0938](https://global.discourse-cdn.com/growingmarijuana/original/3X/f/2/f2f01bb47cdbdd4e67d32e9d88e399a74a4de80c.jpg)

Film days X8 converter is what I took the Micro-ish pics with.

 ![IMG_0960](https://global.discourse-cdn.com/growingmarijuana/original/3X/8/2/82f414f76cb3269e6ca2529777f00b5a2095e79a.jpg)

---

<div class="post-metadata">

**Author:** ![marijgee](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@marijgee](https://ilgmforum.com/u/marijgee)\
**Post date:** [March 13, 2018, 3:25am UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/11 "2018-03-13T03:25:19Z")

</div>

Enough resources to take care of this menace

---

<div class="post-metadata">

**Author:** ![FloridaSon](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/floridason/32/113795_2.png) [@FloridaSon](https://ilgmforum.com/u/FloridaSon)\
**Post date:** [March 14, 2018, 1:53am UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/12 "2018-03-14T01:53:30Z")

</div>

I’m not sure what the white tarp is for, but it’s most likely restricting airflow without proper airflow you will always have that issue.

If you attempt to reveg, you will need better airflow…

---

<div class="post-metadata">

**Author:** ![Candygrowja](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/candygrowja/32/88483_2.png) [@Candygrowja](https://ilgmforum.com/u/Candygrowja)\
**Post date:** [March 15, 2018, 3:13pm UTC](https://ilgmforum.com/t/got-hit-by-mold/17832/13 "2018-03-15T15:13:33Z")

</div>

> [@FloridaSon](#):
>
> I’m not sure what the white tarp is for, but it’s most likely restricting airflow without proper airflow you will always have that issue.
> 
> If you attempt to reveg, you will need better airflow…

you are right. I did not have enough air flow. I was trying to keep it hidden but still, provide bounce light from the sun. I pulled it all down and I have not had that problem.
