# DIY Light Build

**URL:** <https://ilgmforum.com/t/diy-light-build/51911>\
**Category:** Lighting\
**Created:** [August 19, 2020, 6:13pm UTC](https://ilgmforum.com/t/diy-light-build/51911 "2020-08-19T18:13:01Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [August 19, 2020, 6:13pm UTC](https://ilgmforum.com/t/diy-light-build/51911/1 "2020-08-19T18:13:01Z")

</div>

My thought was to build a small light to hang over just 1 big plant.  
Tell me what you think.  
2 boards from hlg QB96  
MEAN WELL Driver HLG-240H-C2100A  
4" x 11" Heatsink

 ![IMG_20200817_131452](https://global.discourse-cdn.com/growingmarijuana/original/4X/2/9/e/29e1d2a901efb21f5d5740d03eb54509209d3f54.jpeg) ![IMG_20200817_131400](https://global.discourse-cdn.com/growingmarijuana/original/4X/2/b/5/2b5b6e823107f15f865b34d48dcb9d13f7e91f20.jpeg)

---

<div class="post-metadata">

**Author:** ![KoolHandLuke](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/koolhandluke/32/676541_2.png) [@KoolHandLuke](https://ilgmforum.com/u/KoolHandLuke)\
**Post date:** [August 19, 2020, 6:36pm UTC](https://ilgmforum.com/t/diy-light-build/51911/2 "2020-08-19T18:36:06Z")

</div>

Nice driver, that what I purchased for my 2 HLG 260 rspec xl

 ![image](https://global.discourse-cdn.com/growingmarijuana/original/4X/3/6/f/36ff924c221d1a59550ec2632b052ca37777c863.jpeg)

---

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [August 19, 2020, 6:50pm UTC](https://ilgmforum.com/t/diy-light-build/51911/3 "2020-08-19T18:50:04Z")

</div>

I like the 260 rspec  
That is what I have in my tent, and that is why I bought these boards.  
My 260 came with a XLG-240-M-AB driver.

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [August 19, 2020, 8:19pm UTC](https://ilgmforum.com/t/diy-light-build/51911/4 "2020-08-19T20:19:48Z")

</div>

I don’t think that heatsink has enough surface area to run those boards at 2100ma without active cooling. They will run for a little bit, but will probably burn up before too long. I would probably remove the driver and install a couple of pc fans over heatsink.

---

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [August 19, 2020, 9:56pm UTC](https://ilgmforum.com/t/diy-light-build/51911/5 "2020-08-19T21:56:37Z")

</div>

That is what I have been thinking and just run the driver remotely.

---

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [August 30, 2020, 6:52pm UTC](https://ilgmforum.com/t/diy-light-build/51911/6 "2020-08-30T18:52:19Z")

</div>

OK  
Well I did some heat tests, first one it hit 100\* in 5 minutes with no fan.  
Second one with 1 fan i got 86\* in 5 minutes and it stayed there for one hour.  
So to be safe I gave it 2 new fans and now it stays at 80\*  
I can’t wait to see how it grows.

 ![IMG_20200830_142223](https://global.discourse-cdn.com/growingmarijuana/original/4X/0/1/6/016cfae3b37f8f41385114aaffe783cd53f94fe5.jpeg)

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [August 31, 2020, 4:40pm UTC](https://ilgmforum.com/t/diy-light-build/51911/7 "2020-08-31T16:40:11Z")

</div>

Are you testing heatsink temp or led temp? The led ratings are usually on thermal junction of the module. Some have a copper pad you can test with thermocouple. If you just test heatsink temps they can be misleading. The quality of your thermal bond between module and heatsink could be poor and not take a good portion of the heat.

---

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [September 2, 2020, 3:22pm UTC](https://ilgmforum.com/t/diy-light-build/51911/8 "2020-09-02T15:22:55Z")

</div>

wow  
a lot to think about. I was checking temp at the heatsink. I checked again and at the board 109\* F.  
Now my question is, will this just shorten the life? Or will this be a fire danger?  
If you think it is a danger I will just change the driver.  
which would you recommend?  
HLG-320H-C2800  
HLG-240H-C2100  
HLG-185H-C1400  
HLG-120H-C1050

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [September 2, 2020, 3:57pm UTC](https://ilgmforum.com/t/diy-light-build/51911/9 "2020-09-02T15:57:12Z")

</div>

> [@2pairs](#):
>
> will this just shorten the life?

Nope

> [@2pairs](#):
>
> will this be a fire danger?

Nope. You will be fine

---

<div class="post-metadata">

**Author:** ![2pairs](https://avatars.discourse-cdn.com/v4/letter/2/8e7dd6/32.png) [@2pairs](https://ilgmforum.com/u/2pairs)\
**Post date:** [September 2, 2020, 6:59pm UTC](https://ilgmforum.com/t/diy-light-build/51911/10 "2020-09-02T18:59:52Z")

</div>

THANKS  
for all the good info.

---

<div class="post-metadata">

**Author:** ![JackAndSan](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/jackandsan/32/458422_2.png) [@JackAndSan](https://ilgmforum.com/u/JackAndSan)\
**Post date:** [September 10, 2021, 9:24pm UTC](https://ilgmforum.com/t/diy-light-build/51911/11 "2021-09-10T21:24:56Z")

</div>

@dbrn32, Hey quick shout out. What is the most current thread you are contributing to for DIY lighting discussions? I just finished a grow and am re-evaluating lighting before i start my next one. 3x4 tent. I am at the crossroad of either just springing for a new HLG setup or taking a little time to roll my own 😉

---

<div class="post-metadata">

**Author:** ![dbrn32](https://sea2.discourse-cdn.com/growingmarijuana/user_avatar/ilgmforum.com/dbrn32/32/533801_2.png) [@dbrn32](https://ilgmforum.com/u/dbrn32)\
**Post date:** [September 10, 2021, 10:18pm UTC](https://ilgmforum.com/t/diy-light-build/51911/12 "2021-09-10T22:18:56Z")

</div>

There is very little that I have going recently. I do have a topic going where we can throw some ideas around though.

> [@Let's talk DIY lights](https://ilgmforum.com/t/lets-talk-diy-lights/13186):
>
> Hi everyone! Just thought I’d start a new thread for us to further the diy light discussion. I don’t sell lights, lighting components, or work in the lighting industry. I have worked professionally with a few of the components, but in the green energy field. I got involved with led grow lights repairing/modifying basic amazon lights a few years back. Since, I’ve kind of become a local 420 friendly electrical support guy. I have access to a handful of different grow rooms utilizing different lig…
