You use an IR gun. If you dont have one I would just set it to -2° if you are using LEDs and following correct par levels.
ThermoPro TP30 Infrared Thermometer Gun, Laser Thermometer for Cooking, Pizza Oven, Griddle, Engine, HVAC, Laser Temperature Gun with Adjustable Emissivity & Max Measure -58°F ~1022°F (Not for Human) https://a.co/d/0TtCUZD
I see, thanks… i will probably end up in investing into one of these…they’re cheap enough.
One thing i learned is you always need the right tool to get the job done right…
Dr buggy has stated that the leaf temps shouldn’t be more or less that 2-3F degrees from the environment…if they are there’s something wrong. Lights too bright, to low or close to light, not enough humidity, etc.
2-3 degree offset setting on the Pro should work.
@Bracketh has you covered. Morning!
Have this one…works great.
Goodmorning… Dr Bugbee is full of great information. I love watching his vids.
True words for sure.
Youtube Videos, Bill WARD. interesting (more when buzzed)
Just another heads up for everybody that has the AC Infinity controllers. Both amazon and ebay AC Infinity stores have the expansion splitters in stock. Beats having to buy another 69 or 69 pro controller.
Does this allow for controlling mutiple tents? @Eternal1
It could. You could run two lights in different tents off of the same port. You could run four fans off of two ports two in each tent. So theoretically…you could do so.
I tried, too much work and money on electricity.
Mistakes are multiplied quickly.
Pushes circuitry in lung room more than efficient.
Switched to HLG lighting and ONE tent and got better plant going, bigger than I have ever had or grown…
If light/tents were on same time schedule,
Use controller to energize circuit going to digital (battery internal) dual circuit controller-timer, for separate time scheduled tents.
Downside, Controller only monitors one temperature device/ or67 could do the job or AC-Infinity circuit controller (series 7X)
True. Both tents would need to have identical everything and then run a 6 inch ducting hose between the two to equalize it as close as possible.
With only one sensor it would never be dead on but maybe close enough.
I run my set up similarly but with two controllers. I have a 3x3 and 3x2 daisy chained with a 6" duct. In the 3x3, I run a 6" filter/exhaust to the outside and have 2 clip fans. In the 3x2, I run one clip fan and a humidifier. My lung room is a constant 70F and RH of 55%.
I was going to do the same thing myself this grow and I think it would have worked fine. But I just ended up buying another 69 pro.
Too much work.
I downsized to one tent for grow and second tent, connected utilized as HASHA .
My Dehumidifier resides there and more volume controlled air from outside and grow tent.
Grow tent has top exhaust InfinityA6 into second tent.
Infinity A6 Intake for grow is bottom connected to both tents.
Grow tent has Attic exhaust T6 and Lung room T6 Filtered exhaust from grow tent.
Second tent has clone mini tent residing in half the space, maybe for future use or hang/cure.
Fall harvest 2022, Mason jar at 60% since 3/1/23 smoked nice and found 25 seeds from the pollinating game. Best configuration of controllers to you, all.
- Upgraded light to HLG, 350R , 260DKit,and UVA-30. big difference.
Ive got the same one i still haven programed all of it and don’t know how i program what ive got but it does turn on my exhaust fan i got lucky lolim not computer smart at all sometimes i get lucky just keep working with it until stuff starts happening lol